TEC 2211-G

TEC 2211-G
Be the first to write a review.


Aerosols and Cleaners, Chemicals, Products Made in the U.S.A., Techspray, Techspray Temporary Solder Masks

Techspray 2211-G Wondermask P Temp Solder Mask 1 gal

Part #: TEC 2211-G
MSRP: $140.66 GAL
Price: $121.11 GAL
Minimum Order Qty: 1
Must be Purchased in Multiples of: 1
Leadtime: Inventory Listed Below - Otherwise Usually Ships In 10-14 Days

Stock Availability

MAIN - NJ 08805 0 GAL

The Techspray 2211-G is Wondermask P Temporary Solder Mask. This is a non-ammoniated, low odor peelable mask. It is Techspray's original synthetic latex peelable solder mask. It comes in a 1 gal, 1 unit case.
Prevent soldering protected areas in a wave soldering process by applying WonderMASK. Designed to apply smoothly, dry quickly, withstand high lead free process temperatures, and then be removed easily. It is also used for masking conformal coating.
Instructions: Apply a 20 to 30 mil coating for best results to desired area. The substrate should be free from grease, oil, and particulates. Drying times depend on ambient humidity. Under normal conditions, WonderMASK P is ready for preheating stage in 1 hour, however, cure can be accelerated to 30 minutes at 65 Degrees C / 150 Degrees F or 20 minutes at 82 Degrees C / 180 Degrees F. Do not over cure, as blistering of mask can occur, causing removal problems. Mask will change from an opaque pink to a translucent red when complete cure is accomplished. Mask does not have to be completely cured to withstand soldering operation; however, it should be completely translucent before removal.
Chemical and Physical Properties:
Appearance: Pink viscous gel
Odor: Low odor
Flash Point: none
VOC (EPA): 28 g/l
Denisty: 1
Chemical Composition (CHEMICAL NAME / CAS NUMBER):
Acrylic Lated Polymer / 27401-61-2
LECHIITHING / 8029-76-3
Alkoxylated alkyphenol / 9064-13-5
Tetrakis-(methylene(3,5-di-tert-butyl-4-hydro-xyhydrocinnamate)-methane / 6683-19-8
2-Propenoic acid, telomer with 2-methyl-2-(1-oxo-2-propenyl)amino-1-prop anesulfonic acid monosodium salt and sodium hydrogen sulfite, sodium salt / 97953-25-8
C7 - C9 alkyl benzyl phthalate

1 gal plastic pail
Non-ozone depleting
Easily peelable
Low odor
Cure indicator – darkens as it cures
Compatible with gold and copper leads

Prices subject to change without notice. Inventory can change at any time. Prices are for online orders only. Inventory quantites typically ship in 24-48 hours. Special orders with the manufacturer vary and are subject to special leadtimes.

WBENC Certified  Visa Mastercard Discover AMEX  Paypal Buyer Credit Click for the BBB Business Review of this Soldering Equipment in Bound Brook NJ  Official PayPal Seal    McAfee Secured