Techspray 2108-12S Turbo-Coat Acrylic Conformal Coating 12 oz

In stock
SKU
tec-2108-12s
Previous
Techspray 2106-G Fine-L-Kote HT Conformal Coating 1 gal

tec-2106-g

Techspray 2106-G Fine-L-Kote HT Conformal Coating 1 gal

Next
Techspray 2108-5G Turbo-Coat Acrylic Conformal Coating 5 gal

tec-2108-5g

Techspray 2108-5G Turbo-Coat Acrylic Conformal Coating 5 gal

$30.26
The Techspray 2108-12S is a Turbo-Coat Acrylic Conformal Coating. It is designed to speed up board production throughput without additional investment on expensive UV systems or other capital equipment. It comes in a 12 oz aerosol pray can.
Techspray 2108-12S Turbo-Coat Acrylic Conformal Coating 12 oz is available to buy in increments of 1
Minimum Order Qty: 12
Must be Purchased in Multiples of: 1
Inventory: 13
Lead time: Inventory Listed above - Otherwise Usually Ships In 10-14 Days
The Techspray 2108-12S is a Turbo-Coat Acrylic Conformal Coating. It is designed to speed up board production throughput without additional investment on expensive UV systems or other capital equipment. It comes in a 12 oz aerosol pray can.Conformal coating cure time is often considered a production bottleneck for PCB assembly operations. TurboCoat dries tack-free in 3 minutes, allowing manufactures to handle boards in 1/3 the time of the leading acrylic coating. Full cure can be achieved as quickly as 10 minutes with elevated temperatures.Technology offers a variety of coating formulas to match field and engineering requirements. Specifications generally depent on the type of protection needed: e.g. thermal, moisture, and static resistance. Coatings contain Opti/Scan to allow quality control inspection of coverage and evenness of the coating on a PCB. A coated board can be passed under a standard, low-cost UV (short-wave black) light, and the coated areas glow. The brighter the glow, the thicker the coating. Instructions: Surface to be sprayed should be thoroughly cleaned with solvent such as Flux Remover G3 (1631). Surface must be completely dry before application of coating. As you spray or brush coating, allow material to flow around components. Coating will be tack free in approximately 5 minutes; however, full cure requires 24 hours depending on humidity and thickness of application. Coated boards can be reworked by applying soldering iron directly to coating, or complete removal can be achieved 1 to 3 hours by using Conformal Coating Remover (2510). Removal time depends on temperature, thickness of coating, and application. Chemical and Physical Properties:Appearance: Clear, colorless liquidOdor: Aromatic odorFlash Point: 1.4 Degrees C (35 Degrees F)VOC (EPA): 33 Percent (aerosol), 64 Percent (bulk)VOC (CARB): 33 Percent (aerosol), 64 Percent (bulk)Boiling Point: 38.4 Degrees C (103 Degrees F)Density: 0.834 at 25 Degrees C (77 Degrees F) Chemical Composition (CHEMICAL NAME / CAS NUMBER):Acrylic Polymer (non-hazardous) / 109-60-4n-Propyl acetate / 142-82-5n-Heptane / 67-64-1Acetone / 88917-22-01-(2-Methoxy-Methyl-Ethoxy)-2-Propanol Acetate / 811-97-21,1,1,2-Tetrafluoroethane (aerosol only)
Please note the minimum purchase quantity for this item is 6 cans (they come in 1 unit)
12 oz aerosolFastest cure – dry to touch in 3 minutes!Max operating temperature - to 257F (125C)Non-ozone depletingDielectric strength - 1000 volts/milFast amp; easy rework amp; repairIPC-CC-830B amp; MIL-I-46058C qualifiedUL94 V-0 ratedUV indicator for black light QC inspectionToluene amp; Xylene free -- no HAPs (hazardous air pollutants)
More Information
California Proposition 65 Not applicable
Product UPC 738888106322
Discontinued No
Brand Techspray
Manufacturer Techspray
Customer Questions
No Questions
Please, mind that only logged in users can submit questions
Who Viewed This Also Viewed
Chemtronics CF3050
Chemtronics CF3050
chemtronics-cf3050
$29.36
Chemtronics SW16025
Chemtronics SW16025
chemtronics-sw16025
$40.89
Chemtronics CT40-5
Chemtronics CT40-5
chemtronics-ct40-5
$26.66