Techspray 2103-12S Fine-L-Kote AR Acrylic Coating 12 oz

The Techspray 2103-12S is a Fine-L-Kote AR Conformal Coating. This acrylic coating is easy to use with good moisture, thermal, and static protection. Acrylic Conformal Coating is an economical choice that provides a hard protective surface. It is commonly used on aviation components. It comes in a 12 oz aerosol spray container. Techspray offers a variety of coating formulas to match field and engineering requirements. Specifications generally depend on the type of protection needed: e.g. thermal, moisture, and static resistance. Coatings contain Opti/Scan to allow quality control inspection of coverage and evenness of the coating on a PCB. A coated board can be passed under a standard, low-cost UV (short-wave black) light, and the coated areas glow. The brighter the glow, the thicker the coating. Chemical and Physical Properties:Appearance: Clear, colorless liquidOdor: Aromatic odorFlash Point: less than 4.4 Degrees C (40 Degrees F)VOC (EPA): 256 g/lBoiling Point: 110 Degrees C (230 Degrees F) Chemical Composition (CHEMICAL NAME / CAS NUMBER):Acrylic polymer / 28262-63-7n-Propyl acetate / 109-60-4Acetone / 67-64-11,1,1,2-Tetrafluoroethane (aerosol only) / 811-97-2
Please note the minimum purchase quantity for this item is 6 (6 units/case)
12 oz AerosolMax operating temperature — to 392F (200C)Dielectric Strength — 640 volts/milNon-ozone depletingRigid, Hard Coating