SEARCH :

TEC 2102-GHV

TEC 2102-GHV
Be the first to write a review.


Categories

Aerosols and Cleaners, Chemicals, Conformal Coatings, Products Made in the U.S.A., Techspray, Techspray Conformal Coatings

Techspray 2102-GHV Fine-L-Kote SR Silicone Coating 1 gal

Part #: TEC 2102-GHV
MSRP: $562.94 GAL
Price: $464.66 GAL
Minimum Order Qty: 1
Must be Purchased in Multiples of: 1
Leadtime: Inventory listed below; Ships in 24-48 hours.
Otherwise, usually ships in 2-3 weeks.

Stock Availability

WarehouseInventory
Main Warehouse 0 GAL
GAL
 


The Techspray 2102-GHV is a Fine-L Kote SR Silicone Conformal Coating. This product is ideal for moisture and thermal vibration protection. It is the most universal coating, offering protection for a wide range of environments. It comes in a 1 gal can bottle.

Techspray offers a variety of coating formulas to match field and engineering requirements. Specifications generally depend on the type of protection needed: e.g. thermal, moisture, and static resistance. Coatings contain Opti/Scan to allow quality control inspection of coverage and evenness of the coating on a PCB. A coated board can be passed under a standard, low-cost UV (short-wave black) light, and the coated areas glow. The brighter the glow, the thicker the coating.

Instructions: Surface to be sprayed should be thoroughly cleaned with solvent such as Flux Remover G3 (1631). Surface must be completely dry before application of coating. As you spray or brush coating, allow material to flow around components. Coating will be tack free in approximately 60 minutes; however, full cure requires 72 hours depending on humidity and thickness of application. Coated boards can be reworked by applying soldering iron directly to coating, or complete removal can be achieved in 1 to 3 hours by using Conformal Coating Remover (2510). Removal time depends on temperature, thickness of coating, and application.

Chemical and Physical Properties:
Appearance: Clear, colorless liquid
Odor: Aromatic odor
Flash Point: -12.2 Degrees C (10 Degrees F)
VOC (EPA): 481 g/l
Boiling Point: 79 Degrees C (134 Degrees F)

Chemical Composition (CHEMICAL NAME / CAS NUMBER):
Acetone / 67-64-1
Hexane / 110-54-3
1-(2-Methoxy-Methyl-Ethoxy)-2-Propanol Acetate / 88917-22-0
Dimethyl methylphenylmethoxy siloxane / 68952-93-2
Methylitrimethoxysilane / 1185-55-3
Benzene-methyl, (Toluene) / 108-88-3
Propane (aerosol only) / 74-98-6

1 gal metal pail
UL recognized - file E95150
Max operating temperature — to 392F (200C)
Non-ozone depleting
Dielectric strength — 1100 volts/mil
Moisture resistant
Chemically resistant
Vibration resistant — flexible
IPC-CC-830B amp; MIL-I-46058C qualified
UL94 V-0 rated
UV indicator for black light QC inspection


Prices subject to change without notice. Stock can change at any time. Prices are for online orders only. Stock items typically ship in 24-48 hours. Special orders with the manufacturer vary and are subject to their leadtimes.


WBENC Certified  Visa Mastercard Discover AMEX  Paypal Buyer Credit Click for the BBB Business Review of this Soldering Equipment in Bound Brook NJ  Official PayPal Seal    McAfee Secured