Techspray 1756-8S Licron Crystal ESD-Safe Coating 8 oz Aerosol

The Techspray 1756-8S is a Licron Crystal ESD-Safe Coating. This coating is a permanent, clear ESD-safe coating. It comes in an 8 oz spray aerosol container. The 1756 is a versatile, crystal clear urethane coating that adheres to metal, plastic, and most other surfaces. It is ideal for converting standard bumpers, bins, tools, and surfaces to ESD safe, saving expensive replacement cost. The end result is compliant with ANSI/ESDS20.20, which prevents static damage to sensitive electronic components. Instructions: Licron Crystal can be sprayed using standard spray guns or paint systems (test compatibility on seals and other plastic rubber components). A grounding wire can then be attached (i.e. by conductive adhesive) similar to an ESD floor. Chemical amp; Physical Properties:Appearance: Dark blue liquidOdor: Alcohol odorFlash Point: 22.2 Degrees C (72 Degrees F)VOC (EPA): 57 PercentVOC (CARB): 57 PercentBoiling Point: 80 Degrees C (176 Degrees F)Density: 0.91 - 0.94 at 25 Degrees C Chemical Composition (Chemical Name / CAS ):2-Propanol / 67-63-01-Butanol / 71-36-3Polymer, Proprietary / 75-52-5Nitromethane / 67-56-1Methanol / 74-98-6Propane (aerosol only) / 106-97-8N-Butane (aerosol only)*Includes other hazardous components in non-reportable quantities
Please note the minimum quantity of purchase for this item is 6
8 oz aerosolRugged static dissipative coatingSurface Resistivity of 10^6 To 10^9 ohmsNon-ozone depletingOperating temperature range – up to 302F (155C)Humidity independentSuperior adhesion to variety of surfaces: glass, plastic, etc.