Techspray 1747-10S Anti-Static Freezer 10 oz Aerosol

The Techspray 1747-10S is an Anti-Static Freezer. This diagnostic freeze spray is for static sensitive assemblies. It comes in a 10 oz spray can. The 1747 Anti-Static Freezer is a rapidly evaporating liquid that super-chills isolated areas. It is used as a troubleshooting aid for intermittently faulting capacitors, resistors, semiconductors, and other defective components. It also increases visibility of cold solder joints, cracks in printed circuit boards and oxidized junctions. Additionally, it contains additives that avoid static build-up, which is critical when working with ESD-sensitive components. Instructions: Can must be held in an upright position when spraying. Do not tilt can more than 40 degrees during spraying operation or shake during use. Before use, press actuator to clear valve of any liquid product. Use short burst to prevent cooling of can.Note: Do not use on photographic negatives without first clearing valve. Chemical amp; Physical Properties:Appearance: Colorless gasOdor: Faint ethereal odorFlash Point: NoneVOC (EPA): zero percentVOC (CARB): zero percentBoiling Point: -26.2 Degrees C (-15.1 Degrees F) Chemical Composition (Chemical Name / CAS ):1,1,1,2-Tetrafluoroethane (aerosol) / 811-97-2Methanol / 67-56-1 Please note the minimum quantity of purchase for this item is 6
10 oz aerosolAvoids static build-upNon-flammableNon-ozone depletingMoisture freeZero residueSafe on plasticsChills down to -40F (-40C)