Out of stock
SKU
tec-1720-5g
The Techspray 1720-5G is a Zero Charge, ESD Safe Floor Coating. This coating is fast drying and antistatic that eliminates static charge and reduces triboelectric generation from flexible surfaces. It is ideal for plastics, fabrics, and carpet. This item comes in a 5 gal pail container.
Minimum Order Qty: 1
Inventory: 0
Lead time: Made To Order - Ships in 4-5 weeks
Discontinued Product!:
Please note that this particular product is no longer made by the manufacturer.
Please note that this particular product is no longer made by the manufacturer.
The Techspray 1720-5G is a Zero Charge, ESD Safe Floor Coating. This coating is fast drying and antistatic that eliminates static charge and reduces triboelectric generation from flexible surfaces. It is ideal for plastics, fabrics, and carpet. This item comes in a 5 gal pail container. Techspray's ESD-safe products can help maintain work areas within the ANSI/ESDS20.20 standards set by the ESD Association (www.esda.com). In a static-free environment, the work area, tools and personnel form a circuit. Electrostatic Discharge (ESD) occurs when the charges of two surfaces with a large electronic potential (difference) equalize instantaneously. The resulting discharge or spark can cause catastrophic or latent damage to electronic components. ESD programs maintan an equal potential by maintaining continuous contact with ground, avoiding ESD damage. Cleaners, lotions, and coatins are an integral part of an ESD control program. Instructions: With a new mop and clean pails, apply coating as follows: 1. Apply thin coat to floor, i.e 3/4 way down on the ringer. Let dry to touch, approximately 45-60 minutes. 2. Apply a second coat, approximately 1/2 way down on the ringer. Note: Two coats only are recommended for conductive tile. 3. If a third coat is applied, wait 24-hour waiting period/dry time after previous coat. If a third coat is applied, the floor space may be occupied once it is dry. After that a 6-hour wait, buff the floor with a coating yield of 1,200 ft2 for each gallon of coating per coat. Chemical amp; Physical Properties:Appearance: Opaque whiteOdor: Aromatic odorFlash Point: noneVOC (EPA) 5.15 percent wt, 53.73 g/lBoiling Point: 100 Degrees C (212 Degrees F)Density: 1.04 at 25 Degrees C Chemical Composition (Chemical Name / CAS ):Water / 7732-18-5Acrylate CopolymerEthanol,2-butoxy-,phosphate / 78-51-31,2-Propanediol / 57-55-6Potassium Chloride / 7447-40-7Alcohols, C12-C13, ethoxylated / 66455-14-9Ethoxylated secondary alcohol / 84133-50-6Sodium lauryl sulfate / 68585-47-7Sodium laurel ether sulfate / 68891-38-3Tall oil fatty acid potassium salt / 61790-44-15-Chloro-2-methyl-3(2H)-isothiaxolone,mixt. with 2-methyl-3(2H)- / 55965-84-9
5 gal pailResistivity between 10^6 To 10^10High gloss polymerNon-ozone depletingSlip resistantEffective in low humidityZinc free
5 gal pailResistivity between 10^6 To 10^10High gloss polymerNon-ozone depletingSlip resistantEffective in low humidityZinc free
Discontinued | Yes |
---|---|
Brand | Techspray |
Manufacturer | Techspray |
Customer Questions
More from Techspray