In stock
SKU
tec-1697-10s
$21.04
The Techspray 1697-10S is a Vortex Duster of 100 percent Pure HFC-134a. This item comes in a 10 oz aerosol spray can.
Techspray 1697-10S Vortex Duster High Velocity HFC-134a is available to buy in increments of 1
Minimum Order Qty: 12
Must be Purchased in Multiples of: 1
Inventory: 3
Lead time: Inventory Listed above - Otherwise Usually Ships In 10-14 Days
The Techspray 1697-10S is a Vortex Duster of 100 percent Pure HFC-134a. This item comes in a 10 oz aerosol spray can. Additionally, Techspray dusters blow away microscopic contaminants, lint, metallic oxide deposits, and other soils that can cause heat buildup or shorts in sensitive electronics. Instructions: Can be held in an upright position when spraying. Do not tilt can more than 40 degrees during spraying operation or shake during use. Before use, press actuator to clear valve of any liquid product. Use short bursts to prevent cooling of can. Note: Do not use on photographic negatives without first cleaning valve. Chemical amp; Physical Properties:Appearance: Colorless gasOdor: Faint ethereal odorFlash Point: noneVOC (EPA): 0 percentVOC (CARB): 0 percentBoiling Point: -26.2 Degrees C (15.1 Degrees F) Chemical Composition (Chemical Name / CAS ):1,1,1,2-Tetrafluoroethane (aerosol) / 811-97-2 Please note the minimum quantity for purchase of this item is 6
10 oz aerosol100% pure HFC-134aNon-flammableNon-ozone depletingMoisture freeZero residueSafe on plasticsVOC exemptVelocity – 14.6 m/sVortex 360 sprays upside-down
10 oz aerosol100% pure HFC-134aNon-flammableNon-ozone depletingMoisture freeZero residueSafe on plasticsVOC exemptVelocity – 14.6 m/sVortex 360 sprays upside-down
California Proposition 65 | Not applicable |
---|---|
Discontinued | No |
Brand | Techspray |
Manufacturer | Techspray |
Customer Questions
More from Techspray