SEARCH :

TEC 1651-G

TEC 1651-G
Be the first to write a review.


Categories

Aerosols and Cleaners, Chemicals, Products Made in the U.S.A., Techspray, Techspray Contact Cleaners, Techspray Degreasers, Techspray Flux Removers

Techspray 1651-G Precision-V Universal Cleaner 1 gal Jug

Part #: TEC 1651-G
MSRP: $361.02 GAL
Price: $314.68 GAL
Minimum Order Qty: 1
Must be Purchased in Multiples of: 1
Leadtime: Inventory listed below; Ships in 24-48 hours.
Otherwise, usually ships in 2-3 weeks.

Stock Availability

WarehouseInventory
Main Warehouse 0 GAL
GAL
 


The Techspray 1651-G is a Precision-V Universal Cleaner. This item comes in a 1 gal glass jug. This product is formulated to reduce VOCs within your facility.
The 1651 is a non-flammable, powerful, high precision cleaner that is formulated to reduce VOCs within your facility. It is ideal for aviation and other applications where strict VOC caps apply (based on EPA VOC exemptions). Bulk chemicals are ideal for cold/bucket cleaning and ultrasonics (not intended for vapor degreaser).
Maintenance cleaners clean oil and contaminants off of metal parts, printed circuit boards, bar code instruments, switch boxes, gear boxes, and engines. Contact cleaners remove oxidation, oil, and other contaminants off of contacts, metal switches, motors, relays, generators, edge connectors, buss bars, circuit breakers, scales and sensors. Contact cleaners are used in electrical maintenance and to repair faulty contacts by removing insulative contamination. Techspray offers a variety of solvents and water based cleaners that allow customers to match the right products with their cleaning needs. Choosing a strong, high quality cleaner saves time and money. Grease and oil flow right off, reducing the time and materials needed to scrub off stubborn soils. Flux removers (defluxers) remove flux residues and other contaminants left by manufacture, rework, or repair of printed circuit boards. Residues from higher, lead free temperatures are more baked on and harder to clean. G3, Ecoline, and PrecisionV flux removers have been proven very effective at removing fluxes baked on at lead free temperatures. Micro components and fine pitch leads are delicate and easily damaged, so brushing, and scrubbing should be avoided if possible. Both G3, Ecoline, and PrevisionV have a powerful spray and strong solvent that blasts off residues and cleans areas under components that a brush cannot touch.
Instructions:
Maintenance cleaning: Disconnect equipment from power source. Make sure opening of spray head is pointing toward surface to be cleaned. Hold can 6-8 inches away. Direct spray to saturate soiled surface. A TechBrush (2000 Series) may be utilized to help in the removal of heavy soils. When used as a general cleaner, start at the top of area to be cleaned using a sweeping motion and spray the area, slowly working toward the bottom. To clean in hard to reach areas, insert extension tube in spray head to direct spray. Allow components to dry completely before applying current.
Defluxing: make sure opening of spray head is pointing toward surface to be cleaned. Hold can 15-20 cm away. Direct spray to saturate soiled surface. A TechBrush (2000 Series) may be utilized to help in the removal of heavy soils. When used as a general cleaner, start at top of area to be cleaned using a sweeping motion, and spray the area slowly, working towards the bottom. To clean in hard to reach areas, insert extension tube in spray head to direct spray. Allow components to dry completely before applying current. For flat surface cleaning, saturate a lint-free TechClean Twillwipe (2357) or Purwipe (2355) and wipe surface with cloth. Rotate the cleaning side of the wipe periodically and re-saturate.
Chemical and Physical Properties:
Appearance: Clear, colorless liquid
Odor: Faint ethereal odor
Flash Point: none
VOC (EPA): 37 percent
VOC (CARB): 75 percent
Boiling Point: 33 Degrees C (91.4 Degrees F)
Density: 1.2815 at 25 Degrees C
Chemical Composition (Chemical Name / CAS NUMBER):
1,1,1,2,2,3,4,5,5,5-decafluoropentane (HFC-4310mee) / 138495-42-8
1,2-transdichloroethylene / 156-60-5
Ethanol / 64-17-5
Cyclopentane / 287-92-3

* 1 gal jug
* Powerful cleaner
* Non-flammable
* Non-ozone depleting
* Safe on electronics
* Rapid evaporation
* Zero residue
* Safe on most plastics
* EPA SNAP approved
* Low VOC
* Dielectric strength - 14 kv


Prices subject to change without notice. Stock can change at any time. Prices are for online orders only. Stock items typically ship in 24-48 hours. Special orders with the manufacturer vary and are subject to their leadtimes.


WBENC Certified  Visa Mastercard Discover AMEX  Paypal Buyer Credit Click for the BBB Business Review of this Soldering Equipment in Bound Brook NJ  Official PayPal Seal    McAfee Secured