Techspray 1635-20S G3 Industrial Maintenance Cleaner 20 oz Aerosol

The Techspray 1635-20S is a powerful G3 Industrial Maintenance Cleaner. This product comes in a 20 oz aerosol spray can. Maintenance cleaners clean oil and contaminants off of metal parts, printed circuit boards, bar code instruments, switch boxes, gear boxes, and engines. Techspray has produced Blue Shower maintenance cleaners for over 30 years, making Blue Shower a staple in maintenance departments all over the world! G3 Industrial Cleaner is perfect for all types of degreasing, metal cleaning, contact cleaning, and other maintenance cleaning. Quickly blasts off oils, greases, silicones, dirt and grime. This patented cleaner is much safer than the three most common non-flammable industrial solvents: TCE, nPB, and Perc. Instructions: Disconnect equipment from power source. make sure opening of spray head is pointing toward surface to be cleaned. Hold can 6-8 inches away. Direct spray to saturate soiled surface. A TechBrush (2000 Series) may be utilized to help in the removal of heavy soils. When used as a general cleaner, start at top of area to be cleaned using a sweeping motion and spray the area, slowly working toward the bottom. To clean in hard to reach areas, insert extension tube in spray head to direct spray. Allow components to dry completely before applying current. Chemical amp; Physical Properties:Appearance: Clear, colorless liquidOdor: Faint ethereal odorFlash Point: 36 Degrees FVOC (EPA): 69 percentVOC (CARB): 69 percentDensity: 1.18 g/ml Chemical Composition (Chemical Name / CAS NUMBER):1,2-transdichloroethylene (Trans) / 156-60-52-Propanol / 67-63-01,1,1,2-Tetrafluoroethane (HFC-134a) / 811-97-2Carbon Dioxide / 124-38-9
Please note the minimum order quantity for this product is 6
* 20 oz aerosol* Powerful cleaner* Non-flammable aerosol* Non-ozone depleting* Safe on electronics* Rapid evaporation* Zero residue* Safe on most plastics* EPA SNAP approved