TEC 1634-12S

TEC 1634-12S
Be the first to write a review.


Aerosols, Aerosols and Cleaners, Chemicals, Products Made in the U.S.A., Techspray, Techspray Flux Removers

Techspray 1634-12S G3 No-Clean Flux Remover 12 oz Aerosol

Part #: TEC 1634-12S
MSRP: $29.45 EA
Price: $26.80 EA
Minimum Order Qty: 12
Must be Purchased in Multiples of: 12
Leadtime: Inventory Listed Below - Otherwise Usually Ships In 10-14 Days

Stock Availability

MAIN - NJ 08805 1 EA

The Techspray 1634-12S is a G3 No-Clean Flux Remover. This product comes in a 12 oz aerosol can.
Flux removers (defluxers) remove flux residues and other contaminants left by manufacture, rework, or repair of printed circuit boards. Residues from higher, lead-free temperatures are more baked on and harder to clean. G3, Ecoline and Precision-V flux removers have been proven very effective at removing fluxes baked on at lead-free temperatures. Micro-components and fine pitch leads are delicate and easily damaged, so brushing and scrubbing should be avoided if possible. Both G3, Ecoline and Precision-V have a powerful spray and strong solvent that blasts off residues and cleans areas under components that a brush cannot touch. The power of G3, but specifically formulated to avoid and clean white residues caused by no-clean fluxes.
Instructions: Make sure opening of spray head is pointing toward surface to be cleaned. Hold can 15-20 cm away. Direct spray to saturate soiled surface. A TechBrush (2000 Series) may be utilized to help in the removal of heavy soils. When used as a general cleaner, start at top of area to be cleaned using a sweeping motion, and spray the area slowly, working towards the bottom. To clean in hard to reach areas, insert extension tube in spray head to direct spray. Allow components to dry completely before applying current. For flat surface cleaning, saturate a lint-free TechClean Twillwipe (2357) or Purwipe (2355) and wipe surface with cloth. Rotate the cleaning side of the wipe periodically and re-saturate.
Chemical amp; Physical Properties:
Appearance: Clear, colorless liquid
Odor: Faint ethereal odor
Flash Point: none
VOC (EPA): 64 percent
VOC (CARB): 75 percent
Boiling Point: 39 Degrees C (102.2 F)
Chemical Composition (Chemical Name / CAS NUMBER):
1,1,1,2,2,3,4,5,5,5-decafluoropentane / 138495-42-8
1,2-transdichloroethylene / 156-60-5
Ethanol / 64-17-5
1,1,1,2-Tetrafluoroethane / 811-97-2
Carbon dioxide / 124-38-9

Please note the minimum order quantity for this product is 6

* 12 oz aerosol
* Powerful cleaner
* Non-flammable
* Non-ozone depleting
* Safe on electronics
* Rapid evaporation
* Zero residue
* Safe on most plastics
* EPA SNAP approved
* Proven effective for lead-free processes
* Ideal for no-clean fluxes

Prices subject to change without notice. Stock can change at any time. Prices are for online orders only. Stock items typically ship in 24-48 hours. Special orders with the manufacturer vary and are subject to their leadtimes.

WBENC Certified  Visa Mastercard Discover AMEX  Paypal Buyer Credit Click for the BBB Business Review of this Soldering Equipment in Bound Brook NJ  Official PayPal Seal    McAfee Secured