Techspray 1631-16S G3 Flux Remover 16 oz Aerosol

In stock
SKU
tec-1631-16s
Previous
Techspray 1621-5G Ecoline Universal Flux Remover 33 lbs

tec-1621-5g

Techspray 1621-5G Ecoline Universal Flux Remover 33 lbs

Next
Techspray 1631-16SB G3 Flux Remover w- Brush 16 oz

tec-1631-16sb

Techspray 1631-16SB G3 Flux Remover w- Brush 16 oz

$38.45
The Techspray 1631-16S is a G3 Flux Remover. This product comes in a 16 oz, aerosol, spray can.
Techspray 1631-16S G3 Flux Remover 16 oz Aerosol is available to buy in increments of 1
Minimum Order Qty: 12
Must be Purchased in Multiples of: 1
Inventory: 247
Lead time: Inventory Listed above - Otherwise Usually Ships In 10-14 Days
The Techspray 1631-16S is a G3 Flux Remover. This product comes in a 16 oz, aerosol, spray can. Flux removers (defluxers) remove flux residues and other contaminants left by manufacture, rework, or repair of printed circuit boards. Residues from higher, lead-free temperatures are more baked on and harder to clean. G3, Ecoline and Precision-V flux removers have been proven very effective at removing fluxes baked on at lead-free temperatures. Micro-components and fine pitch leads are delicate and easily damaged, so brushing and scrubbing should be avoided if possible. Both G3, Ecoline and Precision-V have a powerful spray and strong solvent that blasts off residues and cleans areas under components that a brush cannot touch. Patented defluxer formulated to be powerful and nonflammable, yet economical. Eliminates brushing and scrubbing, saving time and materials. Instructions: Make sure opening of spray head is pointing toward surface to be cleaned. Hold can 15-20 cm away. Direct spray to saturate soiled surface. A TechBrush (2000 Series) may be utilized to help in the removal of heavy soils. When used as a general cleaner, start at top of area to be cleaned using a sweeping motion, and spray the area slowly, working towards the bottom. To clean in hard to reach areas, insert extension tube in spray head to direct spray. Allow components to dry completely before applying current. For flat surface cleaning, saturate a lint-free TechClean Twillwipe (2357) or Purwipe (2355) and wipe surface with cloth. Rotate the cleaning side of the wipe periodically and re-saturate. Chemical amp; Physical Properties:Appearance: Clear, colorless liquidOdor: Faint ethereal odorFlash Point: noneVOC (EPA): 64 percentVOC (CARB): 75 percentBoiling Point: 39 Degrees C (102.2 Degrees F) Chemical Composition (Chemical Name / CAS NUMBER):1,1,1,2,2,3,4,5,5-decafluoropentane / 138495-42-81,2-transdichloroethylene / 156-60-5Ethanol / 64-17-51,1,1,2-Tetrafluoroethane / 811-97-2Carbon dioxide / 124-38-9
Please note the minimum purchase quantity for this product is 6
* 16 oz aerosol* Powerful cleaner* Non-flammable* Non-ozone depleting* Safe on electronics* Rapid evaporation* Zero residue* Safe on most plastics* EPA SNAP approved* Proven effective for lead-free processes
More Information
California Proposition 65 Not applicable
Product UPC 738888102188
Discontinued No
Brand Techspray
Manufacturer Techspray
Customer Questions
No Questions
Please, mind that only logged in users can submit questions
Who Viewed This Also Viewed
Chemtronics S200
Chemtronics S200
chemtronics-s200
$31.33
Xuron 810 Bottle 0.010in. needle
Xuron 810 Bottle 0.010in. needle
xuron-810
4
$3.60
Chemtronics CFK1000
Chemtronics CFK1000
chemtronics-cfk1000
$165.93
Chemtronics DEL101
Chemtronics DEL101
chemtronics-del101
$297.80