Special Order
SKU
tec-1621-10s
$18.06
The Techspray 1621-10S is an E-Line Flux Remover. This product comes in a 10 oz aerosol can. The 1621 Flux removers (defluxers) remove flux residues and other contaminants left by manufacture, rework, or repair of printed circuit boards.
Techspray 1621-10S E-Line Flux Remover 10 oz Aerosol is available to buy in increments of 1
Minimum Order Qty: 12
Must be Purchased in Multiples of: 1
Inventory: 0
Lead time: Inventory Listed above - Otherwise Usually Ships In 10-14 Days
he Techspray 1621-10S is an E-Line Flux Remover. This product comes in a 10 oz aerosol can. The 1621 Flux removers (defluxers) remove flux residues and other contaminants left by manufacture, rework, or repair of printed circuit boards. Residues from higher, lead-free temperatures are more baked on and harder to clean. G3 Ecoline and Precision-V flux removers have been proven very effective at removing fluxes baked on at lead-free temperatures. Micro-components and find pitch leads are delicate and easily damaged, so brushing and scrubbing should be avoided if possible. Both G3, Ecoline and Precision-V have a powerful spray and strong solvent that blasts off residues and cleans areas under components that a brush cannot touch. Ecoline is a hydrocarbon based defluxer formulated to be powerful, yet very economical. Eliminates brushing and scrubbing, saving time and materials. Instructions: Make sure opening of spray head is pointing toward surface to be cleaned. Hold can 15-20 cm away. Direct spray to saturate soiled surface. A TechBrush (200 Series) may be utilized to help in the removal of heavy soils. When used as a general cleaner, start at the top of the area to be cleaned using a sweeping motion, and spray the area slowly, working towards the bottom. To clean in hard to reach areas, insert extension tube in spray head to direct spray. Allow components to dry completely before applying current. For flat surface cleaning, saturate a lint-free TechClean Twillwipe (2357) or Purwipe (2355) and wipe surface with cloth. Rotate the cleaning side of the wipe periodically and re-saturate. Chemical amp; Physical Properties:Appearance / Clear, colorless liquidOdor / Characteristic hydrocarbon odorFlash Point / 22 Degrees FVOC (EPA) / 75 percentVOC (CARB) / 75 percentDensity / 0.713 g/mL at 25 C Chemical Composition (Chemical Name / CAS NUMBER):n-Heptane / 142-82-52-Propanol / 67-63-0Ethanol / 64-17-5Methanol / 67-56-1n-Propyl acetate / 109-60-41,1-difluoroethane (HFC-152a) / 75-37-6
Please note the minimum order quantity for this item is 6
* 10 oz aerosol* Powerful cleaner* Ideal for sensitive plastics* Non-ozone depleting* Safe on electronics* Rapid evaporation* Zero residue* Proven effective for lead-free processes* EPA SNAP approved
Please note the minimum order quantity for this item is 6
* 10 oz aerosol* Powerful cleaner* Ideal for sensitive plastics* Non-ozone depleting* Safe on electronics* Rapid evaporation* Zero residue* Proven effective for lead-free processes* EPA SNAP approved
California Proposition 65 | Not applicable |
---|---|
Discontinued | No |
Brand | Techspray |
Manufacturer | Techspray |
Customer Questions
More from Techspray