Techspray 1573-QT Renew Eco-Oven Cleaner 1 Qt

The Techspray 1573-QT is an Eco-Oven Cleaner which comes in a 1 Qt Container. Techspray's 1573 products are used for periodic preventative maintenance to keep equipment running at top performance levels. Cleans reflow ovens, wave soldering systems, and associated heat exchanger systems by removing all types of flux residues (e.g. water based, RMA, no clean, lead free). It is fast acting and more effective and safe than IPA for baked on flux residues. Instructions (SMT Oven Cleaning): Allow oven to cool down slightly and apply on warm surface (below 100 Degrees C). Spray and saturate the soiled area. Let soak for 5 minutes. Using a lint-free wipe (we recommend Techspray 2350-100 Wiper), wipe slightly at first to allow cleaning agent to break down residues. Continue to wipe in a circular motion until the flux residues are fully removed. Wipe completely with damp (with water) cloth to remove remaining residue. Dispose of soiled wipe as appropriate depending on the type of residues removed.Wave Solder Finger Cleaning: Fill cleaner into finger cleaning reservoir. Keep adequate liquid level. Chemical amp; Physical Properties:Appearance: Clear, mobile liquidOdor: Faint ethereal odorFlash Point: noneVOC (EPA): 2.2 percent, 21.8 g/lVOC (CARB): 2.2 percent, 21.8 g/lBoiling Point: 212 Degrees F (100 Degrees C)Density: 1.00 at 25 Degrees C Chemical Composition (Chemical Name / CAS NUMBER):Ethanol, 2-amino- / 141-43-5Includes other hazardous components in non-reportable quantities. Metals Compatibility (Material Name / Rating):Brass foil / Not recommendedCopper foil / Not recommendedNickel 200 / ExcellentAluminum 6061 / Not recommendedAluminum 2024 / Not recommendedAnodized aluminum / Not recommendedStainless Steel 316 / ExcellentStainless Steel 304 / ExcellentMild carbon steel / Not recommendedGalvanized Steel / Not recommended
* Quickly clean fluz residue from oven amp; wave fingers* Non-flammable* Non-ozone depleting* Safe on warm ovens* Biodegradable* Low VOC, zero GWP