TEC 1573-G

TEC 1573-G
Be the first to write a review.


Aerosols and Cleaners, Chemicals, Products Made in the U.S.A., Techspray, Techspray SMT Cleaners

Techspray 1573-G Renew Eco-Oven Cleaner 1 Gallon

Part #: TEC 1573-G
MSRP: $28.67 GAL
Price: $25.07 GAL
Minimum Order Qty: 1
Must be Purchased in Multiples of: 1
Leadtime: Inventory Listed Below - Otherwise Usually Ships In 10-14 Days

Stock Availability

MAIN - NJ 08805 0 GAL

The Techspray 1573-G is an Eco-Oven Cleaner which comes in a 1 unit, 1 Gallon Container.
Techspray's 1573 products are used for periodic preventative maintenance to keep equipment running at top performance levels. Cleans reflow ovens, wave soldering systems, and associated heat exchanger systems by removing all types of flux residues (e.g. water based, RMA, no clean, lead free). It is fast acting and more effective and safe than IPA for baked on flux residues.
Instructions (SMT Oven Cleaning): Allow oven to cool down slightly and apply on warm surface (below 100 Degrees C). Spray and saturate the soiled area. Let soak for 5 minutes. Using a lint-free wipe (we recommend Techspray 2350-100 Wiper), wipe slightly at first to allow cleaning agent to break down residues. Continue to wipe in a circular motion until the flux residues are fully removed. Wipe completely with damp (with water) cloth to remove remaining residue. Dispose of soiled wipe as appropriate depending on the type of residues removed.
Wave Solder Finger Cleaning: Fill cleaner into finger cleaning reservoir. Keep adequate liquid level.
Chemical amp; Physical Properties:
Appearance: Clear, mobile liquid
Odor: Faint ethereal odor
Flash Point: none
VOC (EPA): 2.2 percent, 21.8 g/l
VOC (CARB): 2.2 percent, 21.8 g/l
Boiling Point: 212 Degrees F (100 Degrees C)
Density: 1.00 at 25 Degrees C
Chemical Composition (Chemical Name / CAS NUMBER):
Ethanol, 2-amino- / 141-43-5
Includes other hazardous components in non-reportable quantities.
Metals Compatibility (Material Name / Rating):
Brass foil / Not recommended
Copper foil / Not recommended
Nickel 200 / Excellent
Aluminum 6061 / Not recommended
Aluminum 2024 / Not recommended
Anodized aluminum / Not recommended
Stainless Steel 316 / Excellent
Stainless Steel 304 / Excellent
Mild carbon steel / Not recommended
Galvanized Steel / Not recommended

* Quickly clean fluz residue from oven amp; wave fingers
* Non-flammable
* Non-ozone depleting
* Safe on warm ovens
* Biodegradable
* Low VOC, zero GWP

Prices subject to change without notice. Inventory can change at any time. Prices are for online orders only. Inventory quantites typically ship in 24-48 hours. Special orders with the manufacturer vary and are subject to special leadtimes.

WBENC Certified  Visa Mastercard Discover AMEX  Paypal Buyer Credit Click for the BBB Business Review of this Soldering Equipment in Bound Brook NJ  Official PayPal Seal    McAfee Secured