Special Order
SKU
kester-24-6337-8804
$39.52
Kester 24-6337-8804 is a 1 lb spool of leaded, no-clean, flux-cored wire solder that is .062 inches in diameter. It is comprised of SN63PB37, or 63 percent tin and 37 percent lead. Additionally, it has a 66 core size and a 245 (no-clean) flux type.
Minimum Order Qty: 1
Inventory: 0
Lead time: Inventory listed above; Ships in 24-48 hours.
Otherwise, usually ships in 3-4 weeks.
Otherwise, usually ships in 3-4 weeks.
Kester 24-6337-8804 is a 1 lb spool of leaded, no-clean, flux-cored wire solder that is .062 inches in diameter. It is comprised of SN63PB37, or 63 percent tin and 37 percent lead. Additionally, it has a 66 core size and a 245 (no-clean) flux type. Kester 245 no-clean cored wire was developed to complement low residue liquid fluxes being used by the electronics industry. The chemistry is based on some of the same principles that have been safely used for years in mildly activated rosin fluxes. The use of 245 no-clean cored wire results in visually acceptable assemblies without cleaning, yet soldering quality and efficiency is comparable to that obtained with mildly activated rosin flux. Kester 245 was formerly classified as Type LR per MIL-F-14256. Kester 245 is Bellcore GR-78 compliant. Performance Characteristics:Highly reliable post-soldering residueMinimal residueCompatible with eladed and lead-free alloysClassified as ROL0 per J-STD-004Compliant to Bellcore GR-78
California Proposition 65 | WARNING: California’s Proposition 65
Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including Lead which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
---|---|
Discontinued | No |
Brand | Kester Solder |
Manufacturer | Kester Solder |
Alloy | Tin (SN), Lead (PB) |
Lead Content | Contains Lead (PB) |
Halogen Content | Contains Halogen |
Spool Size | 1 lb |
Customer Questions
More from Kester Solder