Special Order
SKU
kester-24-6337-7614
$35.20
Kester 24-6337-7614 is a 1 lb spool of leaded, no-clean, core-fluxed solder wire that has a .062 inch diameter. It is comprised of SN63PB37, or 63 percent tin and 37 percent lead. Additionally, it has a 50 core size and a 275 (no-clean) flux type.
Kester 24-6337-7614 SN63PB37 50 Core 275 Flux Solder Wire .062 Dia is available to buy in increments of 25
Minimum Order Qty: 200
Must be Purchased in Multiples of: 25
Inventory: 0
Lead time: Inventory listed above; Ships in 24-48 hours.
Otherwise, usually ships in 3-4 weeks.
Otherwise, usually ships in 3-4 weeks.
Kester 24-6337-7614 is a 1 lb spool of leaded, no-clean, core-fluxed solder wire that has a .062 inch diameter. It is comprised of SN63PB37, or 63 percent tin and 37 percent lead. Additionally, it has a 50 core size and a 275 (no-clean) flux type.
Kester 275 No-Clean Cored Wire for Lead-bearing and Lead-free alloys.Kester 275 No-Clean Flux for cored solder wire was developed to provide superior wetting performance for hand soldering in the electronics industry. The chemistry is based on some of the same principles that have been safely used for years in mildly activated rosin fluxes. The use of 275 No-Clean Flux results in an extremely clear post-soldering residue without cleaning. The unique chemistry in Kester 275 was also designed to reduce spattering common in most core fluxes. Kester 275 can be used for both lead bearing and lead-free soldering. Performance Characteristics:Colorless translucent residuesImproves wetting performanceExcellent solderability and fast wetting to a variety of surface finishedEliminates the need and expense of cleaningLow smoke and odorLow spatteringCompatible with leaded and lead-free alloysClassified as ROL0 per J-STD-004Compliant to Bellcore Gr-78
Kester 275 No-Clean Cored Wire for Lead-bearing and Lead-free alloys.Kester 275 No-Clean Flux for cored solder wire was developed to provide superior wetting performance for hand soldering in the electronics industry. The chemistry is based on some of the same principles that have been safely used for years in mildly activated rosin fluxes. The use of 275 No-Clean Flux results in an extremely clear post-soldering residue without cleaning. The unique chemistry in Kester 275 was also designed to reduce spattering common in most core fluxes. Kester 275 can be used for both lead bearing and lead-free soldering. Performance Characteristics:Colorless translucent residuesImproves wetting performanceExcellent solderability and fast wetting to a variety of surface finishedEliminates the need and expense of cleaningLow smoke and odorLow spatteringCompatible with leaded and lead-free alloysClassified as ROL0 per J-STD-004Compliant to Bellcore Gr-78
California Proposition 65 | WARNING: California’s Proposition 65
Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including Lead which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
---|---|
Discontinued | No |
Brand | Kester Solder |
Manufacturer | Kester Solder |
Alloy | Tin (SN), Lead (PB) |
Lead Content | Contains Lead (PB) |
Halogen Content | Contains Halogen |
Spool Size | 1 lb |
Customer Questions
More from Kester Solder
-
-
-
Kester 182 RMA, Mildly Activated Rosin Soldering Flux ROL1 1 Gallon 63-0000-0182$118.05kester-63-0000-0182
-