Special Order
SKU
kester-7009020511
$109.32
Kester 7009020511 is a SN63PB37 (63 percent tin and 37 percent lead) No-Clean, Type 3, 90 Metal Solder Paste that comes in a 600 gram cartridge.
Kester 7009020511 Solder Paste, FL250D, Sn63Pb37, No-Clean, T3, -325 500, 90%, 600 Gram Cartridge is available to buy in increments of 10
Minimum Order Qty: 10
Must be Purchased in Multiples of: 10
Inventory: 0
Lead time: Inventory listed above; Ships in 24-48 hours.
Otherwise, usually ships in 3-4 weeks.
Otherwise, usually ships in 3-4 weeks.
Kester 7009020511 is a No-Clean, Type 3, SN63PB37 90% Metal Solder Paste that comes in a 600 gram cartridge.
Kester FL250D is a no-clean, air or nitrogen reflowable, solder paste specifically designed for automotive requirements. FL250D is compatible with post-soldering process chemicals, including conformal coatings and potting compounds. FL250D is capable of stencil printing downtimes of up to 90 minutes with an effective first print at 20 mils. FL250D also has the capacity of printing up to 200 mm/sec (8in/sec) with squeegees or within an enclosed head.Excellent residue characteristics that are completely compatible with conformal coating and potting processesHigh print speeds to 200 mm/sec (8 in/sec)Compatible with 0201 technologyExcellent printing characteristics to 0.4mm (16-mil) pitch with Type 3 powderExcellent wetting on a variety of substrates, including OSPsCapable of 90 minute break times in printingStencil life: 8 hours (process dependent)Scrap is reduced due to less paste dry outStable track over 8_ hoursClassified as ROL0 per J-STD-004Compliant to Bellcore GR-78 (uncleaned)Compatible with DEK ProFlow and MPM Rheo Pump enclosed print head systems
Please note: Due to refrigeration requirements, this item must be shipped overnight.For International Orders (out of the United States) product will be shipped International Priority.
Kester FL250D is a no-clean, air or nitrogen reflowable, solder paste specifically designed for automotive requirements. FL250D is compatible with post-soldering process chemicals, including conformal coatings and potting compounds. FL250D is capable of stencil printing downtimes of up to 90 minutes with an effective first print at 20 mils. FL250D also has the capacity of printing up to 200 mm/sec (8in/sec) with squeegees or within an enclosed head.Excellent residue characteristics that are completely compatible with conformal coating and potting processesHigh print speeds to 200 mm/sec (8 in/sec)Compatible with 0201 technologyExcellent printing characteristics to 0.4mm (16-mil) pitch with Type 3 powderExcellent wetting on a variety of substrates, including OSPsCapable of 90 minute break times in printingStencil life: 8 hours (process dependent)Scrap is reduced due to less paste dry outStable track over 8_ hoursClassified as ROL0 per J-STD-004Compliant to Bellcore GR-78 (uncleaned)Compatible with DEK ProFlow and MPM Rheo Pump enclosed print head systems
Please note: Due to refrigeration requirements, this item must be shipped overnight.For International Orders (out of the United States) product will be shipped International Priority.
California Proposition 65 | Not applicable |
---|---|
Discontinued | No |
Brand | Kester Solder |
Manufacturer | Kester Solder |
Customer Questions
More from Kester Solder
-
-
-
-
-
-
- Kester 65-0000-0182 182 RMA, Mildly Activated Rosin Liquid Soldering Flux, ROL1, 53 Gallon Drum$4,614.20kester-65-0000-0182