Kester 64-0000-0110 110 No-Clean Alcohol Based Flux Thinner- 5 Gallons
In stock
SKU
kester-64-0000-0110
Previous
kester-64-0000-0108
Kester 64-0000-0108 108 Flux Thinner- 5 Gallons
Next
kester-64-0000-0135
Kester 135 Non-Activated Rosin Soldering Flux, ROL0, 5 Gallons
$261.80
Kester 64-0000-0110 is a five gallon, 110 No-Clean Alcohol Based Flux Thinner. This thinner is to be used with 951 No-Clean flux.
Kester 64-0000-0110 110 No-Clean Alcohol Based Flux Thinner- 5 Gallons is available to buy in increments of 1
Minimum Order Qty: 3
Must be Purchased in Multiples of: 1
Inventory: 0
Lead time:
CALL (800) 782-4487 TO ORDER THIS ITEM
Material can only ship on a pallet via truck.
Inventory listed above; Ships in 24-48 hours.
Otherwise usually ships in 3-4 weeks ARO.
Kester 64-0000-0110 is a five gallon, 110 No-Clean Alcohol Based Flux Thinner. This thinner is to be used with 951 No-Clean flux.
No-Clean fluxes and VOC free no-clean fluxes are designed for wave-soldering and surface mount circuit board assemblies. These extremely low-solid-content fluxes leave virtually no residue after soldering with no offensive odors. They are formulated to provide good activity and are halogen-free, non-corrosive and have no surface insulation resistance degradation. No-clean fluxes are an environmentally safe alternative to solvent cleaning. Eliminating the need for a cleaning process offers a significant cost-savings.
Looking for a different flux thinnerSelecting the correct Kester thinner for reducing solids or replacing evaporated solvent will result in maximum efficiency of the flux. To select a thinner, find the flux you are using from the chart below:
Please note: This is a Regulated Hazardous Material and is subject to an additional USA UPS/FedEx Ground Hazmat Fee of $33.00 USD per box or USA Air Hazmat Fee of $80.00 - $120.00 USD. International shipping is subject to approval. Contact us for more details.
No-Clean fluxes and VOC free no-clean fluxes are designed for wave-soldering and surface mount circuit board assemblies. These extremely low-solid-content fluxes leave virtually no residue after soldering with no offensive odors. They are formulated to provide good activity and are halogen-free, non-corrosive and have no surface insulation resistance degradation. No-clean fluxes are an environmentally safe alternative to solvent cleaning. Eliminating the need for a cleaning process offers a significant cost-savings.
Looking for a different flux thinnerSelecting the correct Kester thinner for reducing solids or replacing evaporated solvent will result in maximum efficiency of the flux. To select a thinner, find the flux you are using from the chart below:
Please note: This is a Regulated Hazardous Material and is subject to an additional USA UPS/FedEx Ground Hazmat Fee of $33.00 USD per box or USA Air Hazmat Fee of $80.00 - $120.00 USD. International shipping is subject to approval. Contact us for more details.
| Discontinued | No |
|---|---|
| Brand | Kester Solder |
| Manufacturer | Kester Solder |
Customer Questions
Who Viewed This Also Viewed
More from Kester Solder
