Kester 109 Flux Thinner 1 Gallon 63-0000-0109

Kester 109 Flux Thinner reduces solids or replaces evaporated solvents, resulting in maximum flux efficiency. To select a thinner, use the process compatibility information or contact Kester Technical Support.

Kester Flux Thinners are used for reducing solids or replacing evaporated solvent, resulting in maximum efficiency of the flux in an open vessel application such as foam fluxing or dipping. To select a thinner, review the associated Technical Data Sheet. If you have any further questions, please contact Kester Technical Support.

Application

Flux thinners should be added if the Specific Gravity or the Titration test results indicate that the solvent needs to be increased. Test for flux balance should be performed every 4 hours of direct exposure to air. Please refer to the Technical Data Sheet for the proper test method and ranges.

Storage, Handling, and Shelf Life

Solvent based thinners are flammable. Store away from sources of ignition. Shelf life is three years from the date of manufacture when handled properly and held at 10 to 25 °C (50 to 77 °F). Health and Safety This product, during handling or use, may be hazardous to your health or the environment. Read the Safety Data Sheet and warning label before using this product.

Safety Data Sheets are available at this link.