Kester 24-9574-7613 K100LD 66 Core 275 Dia Solder Wire .050 Dia

Special Order
SKU
kester-24-9574-7613
Previous
kester-24-9574-7611

kester-24-9574-7611

kester-24-9574-7611

Next
Kester 24-9574-7615 K100LD 66 Core 275 Flux Solder Wire .062 Dia

kester-24-9574-7615

Kester 24-9574-7615 K100LD 66 Core 275 Flux Solder Wire .062 Dia

$46.19
Kester 24-9574-7613 is a 1 lb spool, of lead-free, Ultrapure K100LD, no-clean, flux-cored solder wire with a diameter of .050 inches. It has a 66 core size and a 275 (no-clean) flux type.
Kester 24-9574-7613 K100LD 66 Core 275 Dia Solder Wire .050 Dia is available to buy in increments of 25
Minimum Order Qty: 100
Must be Purchased in Multiples of: 25
Inventory: 0
Lead time: Inventory listed above; Ships in 24-48 hours.
Otherwise, usually ships in 3-4 weeks.
Kester 24-9574-7613 is a 1 lb spool, of lead-free, Ultrapure K100LD, no-clean, flux-cored solder wire with a diameter of .050 inches. It has a 66 core size and a 275 (no-clean) flux type.
Ultrapure K100 LD (is a lead free solder alloy):Compares favorably to other low-cost, lead-free alloys of tin and copper in terms of wetting and flow characteristics.Low cost, lead-free alloyBright, smooth solder joints with no visible shrinkage effectsExcellent through-hole penetration and topside filletLow dissolution of copper from boards and components into solder potEutectic alloy20% Lower dross rate than SN63Pb37 in laboratory testsLess corrosive to solder pots than SAC305
Kester 275 No-Clean (for lead bearing and lead free alloys):Kester 275 No-Clean Flux for cored solder wire was developed to provide superior wetting performance for hand soldering in the electronics industry. The chemistry is based on some of the same principles that have been safely used for years in mildly activated rosin fluxes. The use of 275 no-clean flux results in an extremely clear post-soldering residue without cleaning. The unique chemistry in Kester 275 was also designed to reduce spattering common to most core fluxes. Kester 275 can be used for both lead bearing and lead-free soldering.
Kester 275 Performance Characteristics:Colorless translucent residuesImproves wetting performanceExcellent solderability and fast wetting to a variety of surface finishesEliminates the need and expense of cleaningLow smoke and odorLow spatteringCompatible with leaded and lead-free alloysClassified as ROL0 per J-STD-004Compliant to Bellcore GR-78
RoHS Compliance:This product meets the requirements of the RoHS (Restriction of Hazardous Substances) Directive 2002/95/EC Article 4 for the stated banned substances. (Applies only if this core flux is combined with lead free alloy).
More Information
California Proposition 65 Not applicable
Discontinued No
Brand Kester Solder
Manufacturer Kester Solder
Alloy Copper (CU), Tin (SN)
Lead Content Lead Free (RoHS)
Halogen Content Contains Halogen
Spool Size 1 lb
Customer Questions
No Questions
Please, mind that only logged in users can submit questions
Who Viewed This Also Viewed
Menda Pump 35268
Menda Pump 35268
men-35268
$26.95