Special Order
SKU
kester-24-7068-8846
$80.52
Kester 24-7068-8846 is a 1 lb spool of lead-free, no-clean, flux-cored solder wire that has a diameter of .040 inches. It is comprised of SN96.5AG3CU.5, or 96.5 percent tin, 3 percent silver, and .5 percent copper. Additionally, it has a 58 core size and a 245 (no-clean) flux type.
Kester 24-7068-8846 SAC305 58 Core 245 Flux Wire Solder .040 Dia is available to buy in increments of 50
Minimum Order Qty: 100
Must be Purchased in Multiples of: 50
Inventory: 0
Lead time: Inventory listed above; Ships in 24-48 hours.
Otherwise, usually ships in 3-4 weeks.
Otherwise, usually ships in 3-4 weeks.
Kester 24-7068-8846 is a 1 lb spool of lead-free, no-clean, flux-cored solder wire that has a diameter of .040 inches. It is comprised of SN96.5AG3CU.5, or 96.5 percent tin, 3 percent silver, and .5 percent copper. Additionally, it has a 58 core size and a 245 (no-clean) flux type.
Kester 245 no-clean cored wire was developed to complement low residue liquid fluxes being used by the electronics industry. The chemistry is based on some of the same principles that have been safely used for years in mildly activated rosin fluxes. The use of 245 no-clean cored wire results in visually acceptable assemblies without cleaning, yet soldering quality and efficiency is comparable to that obtained with mildly activated rosin flux. Kester 245 was formerly classified as Type LR per MIL-F-14256. Kester 245 is Bellcore GR-78 compliant. Performance Characteristics:Highly reliable post-soldering residueMinimal residueCompatible with eladed and lead-free alloysClassified as ROL0 per J-STD-004Compliant to Bellcore GR-78 RoHS Compliance:This product meets the requirements of the RoHS (Restriction of Hazardous Substances) Directive, 2002/95/EC Article 4 for the stated banned substances. (Applies only if this core flux is combined with a lead-free alloy)
Kester 245 no-clean cored wire was developed to complement low residue liquid fluxes being used by the electronics industry. The chemistry is based on some of the same principles that have been safely used for years in mildly activated rosin fluxes. The use of 245 no-clean cored wire results in visually acceptable assemblies without cleaning, yet soldering quality and efficiency is comparable to that obtained with mildly activated rosin flux. Kester 245 was formerly classified as Type LR per MIL-F-14256. Kester 245 is Bellcore GR-78 compliant. Performance Characteristics:Highly reliable post-soldering residueMinimal residueCompatible with eladed and lead-free alloysClassified as ROL0 per J-STD-004Compliant to Bellcore GR-78 RoHS Compliance:This product meets the requirements of the RoHS (Restriction of Hazardous Substances) Directive, 2002/95/EC Article 4 for the stated banned substances. (Applies only if this core flux is combined with a lead-free alloy)
California Proposition 65 | Not applicable |
---|---|
Discontinued | No |
Brand | Kester Solder |
Manufacturer | Kester Solder |
Alloy | Copper (CU), Silver (AG), Tin (SN) |
Lead Content | Lead Free (RoHS) |
Halogen Content | Contains Halogen |
Spool Size | 1 lb |
Customer Questions
More from Kester Solder
-
Kester 25-7040-0061 SN96.5AG03.5 66 Core 44 Flux Solder Wire .062 Dia 4 lb$99.67kester-25-7040-0061
-
-
-
-
-
-
Kester 25-7040-7607 SN96.5AG03.5 58 Core 275 Flux Solder Wire .062 Dia 4 lb$84.26kester-25-7040-7607