Desco ESD 19275

The Desco 19275 is the only the Tester for the Combo Tester X3.

It can be paired with the Desco EMIT 50755 ESD glove test fixture to allow operators to perform tests while wearing gloves or finger cots.

It can test the operator's path to ground, the operator's wrist straps with limits of 750 kilohms to 10 megohms and the operator's foot ground with limits of 750 kilohms to 35 megohms to determine that the personal grounding device(s) functions properly.

Personal grounding device testing time is reduced as the unit can do simultaneous testing in up to three (3) seconds.

The solid state touch test button maintains the accuracy of the tests and extends the life of the tester.

The 30 volt test signal provides accurate tests that are not dependent on humidity.

There is a relay for use with automatic doors or other locking systems to control access to ESD protected areas.

The Desco 50424 calibration unit can be used for accurate performance and conformity testing in the field.

Each unit is NIST (National Institute of Standards and Technology) calibrated.

Made in the USA.