SEARCH :

DES 19788

DES 19788
Be the first to write a review.


Categories

Desco Digital Surface Resistance Meter, Desco ESD, Desco Meters and Measurement, Desco Resistance Testers, ESD Meters & Measurement, ESD Resistance Testers, ESD Static Control, Meters and Measurement, Products Made in the U.S.A., Resistance Meters

Desco 19788 Digital Surface Resistance Meter

Part #: DES 19788
MSRP: $1,316.02 EA
Price: $1,083.52 EA
Minimum Order Qty: 1
Must be Purchased in Multiples of: 1
Leadtime: Usually ships in 5-7 days.

EA
 


The Desco 19788 is the Digital Surface Resistance Meter.  The meter comes with  2 AA alkaline batteries and 1 certificate of calibration.

It features new enclosures with rubber grip handles and a thinner and narrower design that is easier to hold and provides protection if dropped.

The new quick check button bypasses the 15 second electrification period for quick spot checks and the new battery compartment is easy to access without the need for tools or probes.

This kit is used to measure resistance point to point (RTT) or surface to ground (RTG) of worksurfaces, flooring systems, garments, packaging, and other materials in accordance with the ESD Association documents ESD TR53, ANSI/ESD S4 1, ANSI/ESD S7.1, ANSI/ESD STM97.1 and other documents.  It also determines if a surface is dissipative, conductive or insulative for ESD control applications in electronics manufacturing or handling environments.

The resistance range is < 1.0 x 10^3 ohms to > 1.0 x 10^12 ( /- 10% accuracy).

The under load test voltages (10V or 100V /- 5%) meets the ANSI/ESD S20.20 resistance testing requirements for product qualification and compliance verification.

In the "AUTO" mode, the unit can switch to an appropriate test voltage (10V for tests < 1 x 10^6 or 100V for test > 1 x 10^6) or may be fixed to 10V in "HOLD" mode.

Ohm values are expressed with a digital mantissa and LED exponent that provides an easy to read and accurate measurement.

The pre-set 15 second electrification period in full test mode meets the requirements of the ANSI/ESD S4.1 testing requirements.

Temperature (F or C) and relative humidity are measured during the 15 second electrification period as required by the ANSI/ESD S20.20.

Each unit come with a Certificate of Calibration per the accepted procedures and standards traceable to the National Institute of Standards and Technology  (NIST).

Made in the USA.




Prices subject to change without notice. Stock can change at any time. Prices are for online orders only. Stock items typically ship in 24-48 hours. Special orders with the manufacturer vary and are subject to their leadtimes.


WBENC Certified  Visa Mastercard Discover AMEX  Paypal Buyer Credit Click for the BBB Business Review of this Soldering Equipment in Bound Brook NJ  Official PayPal Seal    McAfee Secured