DES 09070

DES 09070
Be the first to write a review.


Desco ESD, ESD Static Control, Products Made in the U.S.A.

Desco 09070 ESD Elastic Adjustable Wrist Strap 6ft

Part #: DES 09070
MSRP: $20.87 EA
Price: $17.20 EA
Minimum Order Qty: 1
Must be Purchased in Multiples of: 1
Leadtime: Inventory listed below; Ships in 24-48 hours.
Otherwise, usually ships in 5-7 days.

Stock Availability


Adjustable, Elastic, Anti Static, Blue Wrist Strap, 6 Ft black coil cord, 4 mm snap. This band has a circumference of 25" - 13" and a .875" width.

Advanced Product Description:

A. Insulating cap, blue ABS plastic.

B. 300 series stainless steel backplate (0.016" thick). Manufacturing date code is stamped into stainless steel backplate.

C. Small cam lock, allows material replacement. 300 series stainless steel.

D. Large cam lock, allows size adjustment, maintains electrical continuity even when open. 300 series stainless steel.

E. Patented floating cam lock allows wide opening for easy adjustment and secures material down against base plate when closed

F. 4mm snap stud machined from 300 series stainless steel. Fits to 4mm spring loaded medical type socket. Coil cord disengages from snap with 1-5 lbs. of perpendicular force, fulfilling ESD-S1 paragraph 4.1.6 breakaway force requirement. Durable, providing long life well beyond that of sheet metal snaps.

G. Knit elastic band material of light blue fiber; .875" (22mm) wide and 0.10" (2.5mm) thick. 50 strands of textured polyester, 36 strands of lycra spandex and 14 strands of silver plated polypropylene yarn. Made with pure silver irreversibly bound to fibers providing both antimicrobial and anti-odor properties. Outer surface of light blue fibers act as an insulator.

H. The conductive silver plated polypropylene represents 13.5% of the material by weight. The strands of conductive polypropylene are randomly knit on the inner surface of the material and are electrically isolated from the outer surface (blue side)

I. Underwriters Laboratory listing 90P1

Meets or exceeds requirements of ANSI ESD-S20.20 and EOS/ESD-S1-1987

Wrist Band

Extra wide, soft elastic band
Increased wearer comfort.

Has silver impregnated polypropylene knitted on inside for superior conductivity
Reliably removes generated static charges. Additionally, silver fibers are antibacterial to help keep the band and operator clean.

Only one item to stock; may be fitted to almost all people.

Date Coded
Providing lot traceability to ensure quality control.
UL Listed
Meets UL amp; OSHA requirements to ensure operator safety.

Made in the United States of America

Coil Cord

Superior Strain Relief Tests In Excess Of 1,000,000 Cycles**; Over 62 Times The Minimum Requirement Per ESD S1.1
Eliminates intermittent failures that occur with less durable cords extending the lifespan of the wrist strap.

Contoured Spring Supported Banana Plug (US Patent 5951337)
Prevents unnecessary wear to banana spring that will lead to accidental disconnects from banana jacks.

Low Profile Snap Design
Keeps cord from being disconnected or getting in the way of operator’s work area.

Six Foot Working Radius (10 Inches of Nonextended Coils) Coil Cord
Allows operator to move freely within work area.

One Megohm Series Resistor
To protect operator from accidental contact with equipment line voltage.

UL listed
Independent review of the adequacy of the product's design.

Date Coded
Provided so that the lifespan of the product may tracked and to ensure quality control.

Made in the United States of America

What the ESD Association says about testing wrist straps:
Per ESD Handbook TR20.20 section Wrist Strap Checkers - “Wrist strap checkers have historically been the primary tool for testing the operation of the wrist strap system including, the wristband, grounding cord and most importantly, the electrical integrity of the contact between the wristband and the wearer. Wrist strap checkers measure the resistance of the entire system.”
Circumference - 2.5" - 13"

NOTE: All bands have a 4mm snap stud. Complete wrist strap kits include an alligator clip. Wrist strap kits include an alligator clip for occasions when a grounded banana jack is not available. However, best industry practice is that ESD Ground Connections should be firm fitting connecting devices such as metallic crimps, snaps and banana plugs to be connected to designated ground points. Use of alligator clips is not recommended. (Ref: JEDEC Standard No. 625-A)

ANSI/ESD S20.20 Paragraph Personnel Grounding Requirement "All personnel shall be bonded or electrically connected to ground or contrived ground when handling ESD sensitive items. When personnel are seated at ESD protective workstations, they shall be connected to the common point via a wrist strap system."

Prices subject to change without notice. Stock can change at any time. Prices are for online orders only. Stock items typically ship in 24-48 hours. Special orders with the manufacturer vary and are subject to their leadtimes.

WBENC Certified  Visa Mastercard Discover AMEX  Paypal Buyer Credit Click for the BBB Business Review of this Soldering Equipment in Bound Brook NJ  Official PayPal Seal    McAfee Secured