For Exclusive Savings
Follow Us!


Official PayPal Seal
Secured by PayPal

  Home > ESD Static Control > Desco Industries Brand > Floor Finish, Paint, and Epoxy > ESD Floor Finish and Floor Care > Statguard Low-VOC Dissipative Floor Finish >

  Desco 10551 - Statguard Low-VOC Floor Finish - 5 Gallon Box

Desco 10551 Statguard Low VOC Floor Finish 5 Gallons


 
Desco Industries
Authorized ESD Specialist & Distributor
Manufacturer Price: $280.27
Price: $230.76
You Save: $49.51!

Quantity in Stock :13
Availability: Factory Stock; Usually Ships in 1 Week
Part #: DESCO-10551
Qty:

Product Description
 
Desco 10551 is a 5 Gallon Box of Statguard Low-VOC Floor finish.

Statguard Low-VOC is a static dissipative zinc free floor finish that will convert non-ESD flooring to an ESD protective floor. Statguard Low-VOC floor finish will protect and maintain ESD permanent flooring such as vinyl composition tiles, sheet vinyl and rubber tiles. Statguard Low-VOC floor finish provides a resistance range (10E7 - 10E9 ohms) and low charge generation (less than 100 volts) that meets or exceeds ANSI/ESD S20.20 minimum requirements as an ESD protective floor or as a primary grounding method. Statguard Low-VOC is made with low volatile solvents in order to meet the requirements of CARB and other regional VOC regulations. Statguard Low-VOC is free of zinc, VOCs, APEs, and other hazardous ingredients. This is important to users being monitored for zinc output, or those desiring to reduce the exposure of dangerous chemicals to workers and the environment. The coating resists abrasion and scuffing in order to maintain ESD performance and appearance. Statguard Low-VOC is packaged in bag-in-boxes and lot coded for quality control.

Also available in the following sizes:
2.5 Gallon Box - Desco 10550
55 Gallon Drum - Desco 10552


Static Dissipative Zinc Free Floor Finish
Used to convert hard non-ESD floor to ESD protective flooring and for use in protecting and enhancing ESD permanent flooring (vinyl, VCT, rubber).
Dissipative (10E7 - 10E9 ohms) Coating - ANSI/ESD S7.1 and ESD TR53
Meets or exceeds ANSI/ESD S20.20 minimum as an ESD protective floor or as a primary grounding method
Low Tribocharging (<100 volts) Coating - ANSI/STM 97.2
Meets or exceeds ANSI/ESD S20.20 minimum requirements for charge generation on flooring
Low-VOC
Meets CARB and other regional VOC requirements
23% Solids- 2 Coat System
Reduces labor needed for initial install and on-going maintenance of the floor
Better Hardness vs Leading Competition ASTM Standard D2134.93
Resists wear in order to maintain ESD performance longer
UL Listed for Slip Resistance
Tested by Underwriters Labs to their slip resistance standards to ensure employee safety and to mitigate user's liability exposure
Bag-In-Box Packaging
Lead-free RoHS Compliant
Made in America

Statguard Low-VOC does not contain harmful chemicals:
NO APE (alkylphenol ethoxylates) surfactants
NO Carcinogens, Mutagens, or Reproductive Toxins
NO Ozone-depleting compounds
NO Ammonia
NO Heavy metals (Zinc Free)
NO Flammable components
NO Components toxic to aquatic life
(Some extra high traffic areas may require an initial 3 coat application)

All prices subject to change without notice. Prices advertised are for online orders only.
Shipping and/or international duties/taxes are separate. Stock availability can change at any time.

Be the first to write a review.



ESD Static Control > Desco Industries Brand > Floor Finish, Paint, and Epoxy > ESD Floor Finish and Floor Care > Statguard Low-VOC Dissipative Floor Finish
ESD Static Control > Desco Industries Brand > Floor Finish, Paint, and Epoxy > ESD Floor Finish and Floor Care
ESD Static Control > Desco Industries Brand > Floor Finish, Paint, and Epoxy
ESD Static Control > Desco Industries Brand
ESD Static Control
Chemicals
Lead Free (RoHS)
Lead Free (RoHS) > ESD Static Control
ESD Static Control > ESD Coatings