The Techspray 1697-8S is a 360 Vortex Duster of 100 percent Pure HFC-134a. The Vortex 360 feature can be sprayed while tiled in any direction without dispensing liquid. It comes in a 8 oz aerosol spray can.
Additionally, Techspray dusters blow away microscopic contaminants, lint, metallic oxide deposits, and other soils that can cause heat buildup or shorts in sensitive electronics.
Instructions: Can be held in an upright position when spraying. Do not tilt can more than 40 degrees during spraying operation or shake during use. Before use, press actuator to clear valve of any liquid product. Use short bursts to prevent cooling of can. Note: Do not use on photographic negatives without first clearning valve.
Chemical & Physical Properties:
Appearance: Colorless gas
Odor: Faint ethereal odor
Flash Point: none
VOC (EPA): 0 percent
VOC (CARB): 0 percent
Boiling Point: -26.2 Degrees C (15.1 Degrees F)
Chemical Composition (Chemical Name / CAS #):
1,1,1,2-Tetrafluoroethane (aerosol) / 811-97-2
Please note the minimum quantity for purchase of this item is 6
For the same product in a different size please see product below
Home
.jpg)
