The Techspray 1668-8S is a Contact Cleaner II for Sensitive Plastics. This non-flammable, high precision contact cleaner comes in an 8 oz aerosol can and is often used in seals and outer castings.
Instructions: Disconnect equipment from power source. make sure opening of sprayhead is pointing toward surface to be cleaned. Hold can 6-8 inches away. Direct spray to saturate soiled surface. A TechBrush (2000 Series) may be utilized to help in the removal of heavy soils. When used as a general cleaner, start at top of area to be cleaned using a sweeping motion and spray the area, slowly working toward the bottom. To clean in hard to reach areas, insert extension tube in sprayhead to direct spray. Allow components to dry completely before applying the current.
Physical & Chemical Properties:
Appearance: Clear, colorless liquid
Odor: Faint ethereal odor
Flash Point: none
VOC (EPA): .016 Percent
VOC (CARB): 75 Percent (aerosol)
Boiling Point: 54 Degrees C (129 Degrees F)
Chemical Composition (Chemical Name / CAS #):
3,3-Dichloro-1,1,1,2,2-pentafluoropropane / 422-56-0
1,3-Dichloro-1,1,2,2,3-pentafluoropropane / 507-55-1
Acetone / 67-64-1
1,1,1,2-Tetrafluoroethane (aerosol) / 811-97-2
Carbon dioxide (aerosol) / 124-38-9
Please note the minimum purchase quantity for this item is 6
For the same product in an additional size please see additional products below
Home
.jpg)
