The Techspray 1635-20S is a powerful G3 Industrial Maintenance Cleaner. This product comes in a 20 oz aerosol spray can.
Maintenance cleaners clean oil and contaminants off of metal parts, printed circuit boards, barcode instruments, switch boxes, gear boxes, and engines. Techspray has produced Blue Shower maintenance cleaners for over 30 years, making Blue Shower a staple in maintenance departments all over the world! G3 Industrial Cleaner is perfect for all types of degreasing, metal cleaning, contact cleaning, and other maintenance cleaning. Quickly blasts off oils, greases, silicones, dirt and grime. This patented cleaner is much safer than the three most common non-flammable industrial solvents: TCE, nPB, and Perc.
Instructions: Disconnect equipment from power source. make sure opening of sprayhead is pointing toward surface to be cleaned. Hold can 6-8 inches away. Direct spray to saturate soiled surface. A TechBrush (2000 Series) may be utilized to help in the removal of heavy soils. When used as a general cleaner, start at top of area to be cleaned using a sweeping motion and spray the area, slowly working toward the bottom. To clean in hard to reach areas, insert extension tube in sprayhead to direct spray. Allow components to dry completely before applying current.
Chemical & Physical Properties:
Appearance: Clear, colorless liquid
Odor: Faint ethereal odor
Flash Point: 36 Degrees F
VOC (EPA): 69 percent
VOC (CARB): 69 percent
Density: 1.18 g/ml
Chemical Composition (Chemical Name / CAS NUMBER):
1,2-transdichloroethylene (Trans) / 156-60-5
2-Propanol / 67-63-0
1,1,1,2-Tetrafluoroethane (HFC-134a) / 811-97-2
Carbon Dioxide / 124-38-9
Please note the minimum order quantity for this product is 6
Home
.jpg)
