For Exclusive Savings
Follow Us!


Official PayPal Seal
Secured by PayPal

  Home > Kester Brand >

  Kester 56-0025-5744 - 5744 Solder Saver Dross, 25 lbs

Kester 56-0052-5744 5744 Solder Saver Dross Remover
Kester Solder


 
KESTER
Authorized Distributor

In stock items ship in 24-48 hours!
Otherwise, on order with the manufacturer
and will ship in approximately 3-4 weeks.


Price: $349.95

Quantity in Stock : 0
Part #: KESTER-56-0025-5744
Qty:

Product Description
 
Kester 56-0052-5744 is a 25 lb container of 5744 solder saver dross remover.  

This dross remover is chloride-free, inorganic white powder formulated to remove dross, which is the oxide of solder, from still solder pots and wave soldering machines. Unlike most active reducing materials, Kester 5744 does not decompose to sticky residues that are harder to remove than the original dross. Kester 5744 has been designed to be low fuming and is stable at molten solder temperatures below 260 degrees C (500 degrees F). Unlike flammable, messy, organic based solder cover chemicals, Kester 5744 is a nonflammable powder that remains a solid while it is working and is easily removed from the solder pot after it is used. Reducing tin oxide back to tin metal will greatly reduce dross scrap and will help keep the soldering pot surface clear of residues.

Physical Properties:
Appearance: White Crystals
Melting Point: Sublimes >300 degrees C
Flash Point: None


Application Notes: Kester 5744 must be used on a still solder pot surface. All solder wave pumping and agitation action must be turned off. The pot temperature should be controlled to 232-260°C (450-500°F).  Cover the solder surface with Kester 5744 by sprinkling the powder on the pot in a thin covering layer, no greater than 6.4mm (0.25in) thick.  Slowly mix the salt with the surface of the solder with a metallic solder ladle or a metal spatula.  Allow the salt 10 seconds after mixing to convert the dross back to solder. Move any dross on the pot into the salt covered surface to covert the dross to metal. When done, remove the dross recovery salt and other dirt residues with a metallic solder ladle or a metal spatula. All of the Kester 5744 should be removed from the solder surface.   Kester 5744 is intended to be used as received.
Storage and Shelf Life: Kester 5744 should be stored in sealed containers.  Shelf life is 3 years from date of manufacture when
handled properly and held at -10-45°C (14-113°F).
Health & Safety: This product, during handling or use, may be hazardous to health or the environment. Read the Material Safety Data Sheet and warning label before using this product.

All prices subject to change without notice. Prices advertised are for online orders only.
Shipping and/or international duties/taxes are separate. Stock availability can change at any time.

Be the first to write a review.



Kester Brand
Soldering Materials > Solder Saver
Soldering Materials