Special Order
SKU
kester-24-6040-9702
$101.93
Kester 24-6040-9702 is a 1 lb spool of leaded solder wire that has a diameter of .020 inches. It is comprised of SN60PB40, or 60 percent tin and 40 percent lead. Additionally, is has a 66 core size and a 285 (mildly activated rosin) flux type.
Minimum Order Qty: 100
Inventory: 0
Lead time: Inventory listed above; Ships in 24-48 hours.
Otherwise, usually ships in 3-4 weeks.
Otherwise, usually ships in 3-4 weeks.
Kester 24-6040-9702 is a 1 lb spool of leaded solder wire that has a diameter of .020 inches. It is comprised of SN60PB40, or 60 percent tin and 40 percent lead. Additionally, is has a 66 core size and a 285 (mildly activated rosin) flux type. Kester 285 mildly activated rosin flux is classified as Type ROL0 flux under IPC J-STD-004. This flux was formerly classified as Type RMA per QQ-S-571. Kester 285 consists of high quality, purified rosin to which a synergistic combination of activating agents has been incorporated. The fluxing ability of 285 is much greater than ordinary mildly activated rosin fluxes and is comparable to fully activated rosin fluxes. Kester 285 has been developed for use in the electronic industry where difficult assemblies are to be soldered, but process requirements stipulate use of a mildly activated rosin flux. Performance Characteristics:Industry standard RMA cored wireCompatible with leaded and lead-free alloysClassified as ROL0 per J-STD-004
California Proposition 65 | WARNING: California’s Proposition 65 Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including Lead which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
---|---|
Discontinued | No |
Brand | Kester Solder |
Manufacturer | Kester Solder |
Alloy | Tin (SN), Lead (PB) |
Lead Content | Contains Lead (PB) |
Halogen Content | Contains Halogen |
Spool Size | 1 lb |
Customer Questions
More from Kester Solder