Kester 25-9574-1400 K100LD 66 Core 48 Flux Solder Wire .062 Dia 4 lb

Special Order
SKU
kester-25-9574-1400
Previous
Kester 25-9574-0654 K100LD 66 Core OR-421 Flux Solder Wire .062 Dia 4 lb

kester-25-9574-0654

Kester 25-9574-0654 K100LD 66 Core OR-421 Flux Solder Wire .062 Dia 4 lb

Next
Kester 25-9574-7613 K100LD 66 Core 285 Flux Solder Wire .050 Dia 4 lb

kester-25-9574-7613

Kester 25-9574-7613 K100LD 66 Core 285 Flux Solder Wire .050 Dia 4 lb

$47.04
Kester 25-9574-1400 is a 4 lb spool of lead-free, K100LD, RA, flux-cored solder wire with a diameter of .062 inches. It has a 66 core size and a 48 (RA) flux type)
Kester 25-9574-1400 K100LD 66 Core 48 Flux Solder Wire .062 Dia 4 lb is available to buy in increments of 25
Minimum Order Qty: 120
Must be Purchased in Multiples of: 25
Inventory: 0
Lead time: Inventory listed above; Ships in 24-48 hours.
Otherwise, usually ships in 3-4 weeks.
Kester 25-9574-1400 is a 4 lb spool of lead-free, K100LD, RA, flux-cored solder wire with a diameter of .062 inches. It has a 66 core size and a 48 (RA) flux type)
Ultrapure K100 LD (is a lead free solder alloy):Compares favorably to other low-cost, lead-free alloys of tin and copper in terms of wetting and flow characteristics.Low cost, lead-free alloyBright, smooth solder joints with no visible shrinkage effectsExcellent through-hole penetration and topside filletLow dissolution of copper from boards and components into solder potEutectic alloy20% Lower dross rate than SN63Pb37 in laboratory testsLess corrosive to solder pots than SAC305 Kester 48 Product Description:Kester 48 Activated Rosin Flux for cored solder wire was developed for lead-free applications to enable soldering of most common metals. Kester 48 has performance characteristics far exceeding standard RA fluxes. Kester 458 builds on the performance of its predecessor Kester 44 with "instant-action" wetting to provide fast and reliable solder joints Kester 48 Performance Characteristics:Unparalleled wetting performanceExcellent solderability and fast wetting to a variety of surface finishedEliminates the need and expense of cleaningLow smoke and odorLow spatteringClassified as ROM1 per J-STD-004 Kester 48 vs Kester 44:Kester 28 provides a higher level of activity than Kester 44, see Spread Test opposite.Kester 48 dramatically reduces splattering by 50% over Kester 44Kester 48 residues are transparent and nearly colorless compared to the traditional amber appearance of Kester 44Kester 48 was designed for lead-free alloys RoHS Compliance:This product meets the requirements of the RoHS (Restriction of Hazardous Substances) Directive, 2002/95/EC Article 4 for the stated banned substances. (Applies only if this core flux is combined with a lead free alloy).
More Information
California Proposition 65 Not applicable
Discontinued No
Brand Kester Solder
Manufacturer Kester Solder
Alloy Copper (CU), Tin (SN)
Lead Content Lead Free (RoHS)
Halogen Content Contains Halogen
Spool Size 4 lb
Customer Questions
No Questions
Please, mind that only logged in users can submit questions
Who Viewed This Also Viewed