For Exclusive Savings
Follow Us!
Click for the BBB Business Review of this Soldering Equipment in Bound Brook NJ

Official PayPal Seal
Secured by PayPal

  Home > ESD Static Control > Desco Industries Brand > Floor Finish, Paint, and Epoxy > ESD Floor Finish and Floor Care > Statguard Dissipative Floor Finish >

  Desco 10512 - Finish Floor Statguard - 5 GAL Box

Desco 10512 ESD Floor Finish, Desco Statguard


 
Desco Industries
Authorized ESD Specialist & Distributor
Manufacturer Price: $287.42
Price: $236.64
You Save: $50.78!

Quantity in Stock :99
Availability: Factory Stock; Usually Ships in 1 Week
Part #: DESCO-10512
Quantity:

Product Description
 
Desco 10512 is a Finish, Floor, Statguard 5 Gal Box.

Statguard Static Dissipative Cross-Linked Floor Finish is used to dissipate static charges as well as prevent triboelectric (static charge generation) charges while providing a clear, high gloss finish that resists wear. Statguard Static Dissipative Floor Finish is a free flowing liquid cross-linked emulsion, which can be applied on any hard surface or sealed floor including vinyl, vinyl asbestos, linoleum, rubber, asphalt, sealed or painted wood, terrazzo and concrete. Statguard technology eliminates the need for static control tile or floor mats. Statguard dries in one hour and is ideal for clean room and electronic manufacturing, assembly, and test areas. For use in environments with relative humidity of 30-65%.

This item is also available in different sizes:
Desco 10511 - 2.5 GAL
Desco 10520 - 55 GAL


Static Dissipative Cross-Linked Floor Finish
Used to convert hard non-ESD floors to ESD protective flooring and for use in protecting and enhancing ESD permanent flooring (vinyl, VCT, rubber)
Dissipative (10E7 - 10E9 ohms) Coating - ANSI/ESD S7.1 and ESD TR53
Meets or exceeds ANSI/ESD S20.20 minimum requirements as an ESD protective floor or as a primary grounding method
Low Tribocharching (<100 volts) Coating - ANSI/STM 97.2
Meets or exceeds ANSI/ESD S20.20 minimum requirements for charge generation on flooring
18% Solids - 3 Coat System
Reduces labor needed for initial install and on-going maintenance of the floor
UL Listed for Slip Resistance
Tested by Underwriters Laboratory to their slip resistance standards to ensure employee safety and to mitigate user's liability exposure
Bag-in-Box Packaging
Lead-free RoHS Compliant
Made in the United States of America

Important Safety Features: Safe Walking Surface - Classified by UL as to slip resistance only, Statfree and Statguard provide superior electrical properties along with a safe walking surface. Underwriters Laboratory has evaluated Statfree and Statguard and tested them to their slip resistance standards. To ensure employee safety and to mitigate user's liability exposure, it is important to use floor finish that has been successfully tested for slip resistance, and is properly applied and maintained.

RTT: 10E7 ohms per ANSI/ESD S4.1 @ 50% R.H.
Coverage: 2,000 sq. ft/gallon
Density: 8.4 lbs/gal
pH: 8.9
Solids: 18%
Water Soluble

All prices subject to change without notice. Prices advertised are for online orders only.
Shipping and/or international duties/taxes are separate. Stock availability can change at any time.

Be the first to write a review.



ESD Static Control > Desco Industries Brand > Floor Finish, Paint, and Epoxy > ESD Floor Finish and Floor Care > Statguard Dissipative Floor Finish
ESD Static Control > Desco Industries Brand > Floor Finish, Paint, and Epoxy > ESD Floor Finish and Floor Care
ESD Static Control > Desco Industries Brand > Floor Finish, Paint, and Epoxy
ESD Static Control > Desco Industries Brand
ESD Static Control
ESD Static Control > ESD Chemical & Dispensing
ESD Static Control > ESD Care & Maintenance
ESD Static Control > ESD Care & Maintenance > Floor Care & Maintenance