Desco 19590 is an Chargebuster Ion Gun that is 120 volts.
The Desco 19590 is a Chargebuster Ion Gun that is a Point-of-Use Ionizer. It uses compressed air nitrogen to neutralize static charges in localized areas. Most companies address ElectroStatic Attraction, visual imperfections, and contamination issues by dislodging charged dust and debris with compressed air ionizers. There is sometimes a need to provide static control in a small defined area or location. This may be done to provide static control within production equipment, in mini-environments, or to facilitate particle removal from part of a product. Ionizers used for this purpose may be blow-off guns or nozzles that work with a supply of compressed air or nitrogen. They may use either nuclear, soft x-ray or any of the previously described types of corona ionization technology. It will be important to choose a method of ionization and cleanliness of the gas supply that is appropriate to the work area.
The modular and ergonomic design includes an ESD protective flexible hose and is easily controlled by depressing the trigger. The Desco 19590 Chargebuster Ion Gun meets or exceeds the required limits of ANSI/ESD S20.20 when tested in accordance with ANSI/ESD S3.1 and ESD TR53.
Compact and lightweight, the Chargebuster Ion Gun's console can be mounted anywhere on the workstation for easy access. The console connects to any supply of clean dry air or nitrogen, and an internal disposable filter collects residual particles, oil, and moisture. The console, gun, and air hose are static-dissipative. The 8 foot hose allows for convenient neutralization of localized areas where desired.
The Chargebuster Ion Gun reduces a static charge of plus/minus 1000 V down to plus/minus 100 V in less than one second at the distance of 6 inches (30-psi / 0.2MPa inlet pressure). Refer to the ESD Association ANSI/ESD Standard STM3.1 for the test procedure. The offset voltage (balance) is within plus/minus 30 V of zero at a distance of six inches, significantly less than the required limits of < plus/minus 50 volts per ANSI/ESD S20.20.
Packaging:
1 Chargebuster Ion Gun with Hose
1 19591 Air Filter
1 Power Adapter (120VAC in. 24VAC out)
1 10' Cable
1 Mounting Plate
1 Quick Coupling
1 S-Hook
4 Screws
1 Certificate of Calibration
Home
.jpg)
