Thick conductive adhesive excellent for conformability to protect critical PCB features
Use in applications masking PCBs gold features for wave soldering or soldering under 302°F (150°C)
For OEM repair shops
For securing polyethylene sheeting to walls during painting
Protection purposes in manufacturing processes, strips clean
Masking application in spray and brush painting, nonstaining
For silk screening applications
Handles temperatures found in test and burn-in ovens
Easily handles high temperatures of wave soldering without leaving a residue
Ideal for masking gold leads and other components on boards populated with sensitive integrated circuits
Backing
Saturated, high strength crepe paper
Adhesive
Natural rubber based, non-staining, solvent spread, cured
Thickness
0.18 mm / 7 mils
Adhesion Strength
38 N/100 mm / 35 oz/in2
Tensile Strength
385 N/100 mm / 22 lbs/in2
Temperature Resistance
302°F (150°C) - 60 minutes
Roll length
55 meters (60 yards)
Thickness
7.0 mil (0.18 mm)
Adhesion to steel
35 oz/in2
Elongation
8%
Moisture Resistance
Fair
Solvent Resistance
Good
Storage Stability
Excellent
Temperature Range
-32°F to + 275°F
Max Temp
275°F (135°C) 45 minutes max
Lead-free RoHS compliant
Made in America
ANSI/ESD S20.20 requires that all nonessential insulators, such as those made of plastics and paper, must be removed from the workstation. Substituting antistatic tape for regular tape (a very high tribocharging insulator) protects your ESD susceptible products.
The user must determine the suitability for use of an antistatic tape for particular applications, and should reevaluate suitability one year after purchase date.
Note: Tapes store best when laid flat in a dry, well ventilated room with a reasonably consistent temperature of 20° C (68° F) and are protected from exposure to direct sunlight.
|
Home
.jpg)
