Economical Dual Layer Vinyl Material
Versatile dissipative worksurface table mat provides reliable path to ground and allows for use with continuous monitors.
Dissipative Worksurface - 10E6 - 10E8 Ohms RTT
Controls charge removal; meets worksurface required limits of ANSI/ESD S20.20 and recommendations of ANSI/ESD S4.1
Abrasion Resistant Top Layer
Smooth surface is easy to clean and maintain
Top of Mat Kits Laser Engraved With ESD Protective Symbol & Manufacturer
Identifies ESD protective product for control & auditing purposes
Provides consistent electrical performance regardless of ambient humidity
Dimensionally Stable and Lays Flat
Maintains dimensions and lays flat at work station
Lead-Free RoHS Compliant
Includes 14213 Ground Cord
Made in The United States of America
Estimated Shipping Weight: 7.00 Pounds
RTT (front side): 10E6 - 10E8 Ohms per ANSI/ESD S4.1
RTT (back, stipple site): <10E5 Ohms per ANSI/ESD S4.1
Thickness: 0.060" (1.5mm)
Per ESD Association: "The most important functional consideration for worksurfaces is the RTG resistance from the top of the surface to the groundable point." ANSI/ESD S20.20 Table 1 recommends a requirement of less than 1 x 10E9 ohms. "If Charged Device Model damage is a concern then setting a lower resistance limit should be considered. Typically, 1 x 10E6 ohms." "Durability factors that should be considered are hardness, abrasion resistance, tear resistance, etc. Worksurfaces may require special heat resistant materials. Light reflection may be an important ergonomic consideration." (Ref: TR 20.20 section 5.3.1).
Due to variations in computer monitor displays, color shown may not be exact. For true accurate color, please email email@example.com to request an actual sample.