For Exclusive Savings
Follow Us!
Click for the BBB Business Review of this Soldering Equipment in Bound Brook NJ

Official PayPal Seal
Secured by PayPal

  Home > ESD Static Control > Desco Industries Brand > Worksurface Mats >

  Desco 66122 - Statfree T2 Rubber Roll - Green

Desco Industries
Authorized ESD Specialist & Distributor
MSRP: $713.97
Price: $534.39
You Save: $179.58!

Quantity available:28
Availability: Factory Stock; Usually Ships in 1 Week
Part #: DESCO-66122

Product Description Technical Specifications
Desco 66122 is a Statfree T2 Lead-Free Area Dissipative, Dual Layer Green Rubber Roll that is 36 inches by 24 feet. This antistatic, ESD safe mat roll is .060 inches thick.

Statfree T2 meets the worksurface requirements of ANSI/ESD S20.20 and recommendation of ESD S4.1. This material is a dual purpose rubber matting material.  The two layer construction allows it to be used as a dissipative or a conductive matting product. The soft dissipative layer makes an excellent table mat, ideal for use in soldering and assembly areas. This rubber material has superior resistance to heat, abrasion, chemicals, and is easy to clean and maintain. Statfree T2 material will not melt and does not burn when coming into contact with hot metal parts or soldering debris. It is amine, chloride, sulfide, alumina, and magnesia free. Statfree T2 is suitable for use with continuous monitors.

Statfree T2 is manufactured without any ozone depleting substances, and in accordance with the Montreal Protocol.

Dissipative Dual Layer Rubber Material
Provides a worksurface that does not generate a static charge and will control the discharge rate from all conductors (including ESD susceptible items) that are placed on the surface.
Dissipative (10E6 - 10E8 ohms Rtt) Top Layer - Limited Lifetime Warranty
Meets ANSI/ESD S20.20 worksurface required limit and recommendation of ANSI/ESD S4.1 for contact with ESD susceptible items. Electricals will not drift for the life of the mat.
Conductive (<10^4 Rtt) Bottom Layer - Limited Lifetime Warranty
The dedicated conductive layer reduces the resistance to ground (Rtg) from the top of the surface to the groundable point ground and allows the mats to be used with ESD workstation monitors. Electricals will not drift for the life of the mat.
High Strength Nitrile Rubber Compound
Designed to withstand abrasion, stretching, and tearing and may be used in soldering applications with flux and other chemicals.
Ultra-Violent (UV) Stabilizer Additives
Stabilizes color retention, insures ESD performance over time and eliminates surface layer deterioration resulting in cracking when the product is flexed.
Non-Humidity Dependence
Provides consistent electrical performance regardless of ambient humidity
Lot Traceability Information
Provides tracking information for lifespan of the product and to ensure quality control.
Lead-free RoHS compliant
Made in the United States of America
"The most important functional consideration for worksurfaces is the RTG resistance from the top of the surface to the groundable point." ANSI/ESD S20.20 Table 1 recommends a requirement of less than 1 x 10E9 ohms. "If Charged Device Model damage is a concern then setting a lower resistance limit should be considered. Typically, 1 x 10E6 ohms." "Durability factors that should be considered are hardness, abrasion resistance, tear resistance, etc. Worksurfaces may require special heat resistant materials. Light reflection may be an important ergonomic consideration." (Ref: TR 20.20 section 5.3.1).
Due to variations in computer monitor displays, color shown may not be exact.  For true accurate color, please email to request an actual sample.
Sanitizing Statfree® Rubber ESD Matting

Statfree® Rubber ESD Mats can be periodically sanitized using products such as Purell Hand Sanitizers.  The Center of Disease Control is recommending products with greater than 60% Ethyl Alcohol for sanitizing.  Common sanitizing products like Purell are 62% Ethyl Alcohol.  These products should not affect the electrical properties of our Statfree® rubber matting products so long as there is not prolonged exposure, meaning saturating or leaving liquid on the surface for a period of greater than 1 hour.  Sanitizing can be achieved by periodically wiping the mat with the sanitizing product, however, there may be some discoloration or staining.  Sanitizing is NOT a replacement for regular mat cleaning.  Reztore Antistatic Surface and Mat Cleaner should continue to be used as part of a regular maintenance program to maintain proper electrical function of Statfree® worksurfaces.

Prices subject to change without notice. Stock can change at any time. Prices are for online orders only.

ESD Static Control > Desco Industries Brand > Worksurface Mats
ESD Static Control > Desco Industries Brand > Worksurface Mats > Rubber Worksurface Mats
ESD Static Control > Desco Industries Brand > Worksurface Mats > Rubber Worksurface Mats > Statfree T2 Dissipative Dual Layer Rubber Mat
Lead Free (RoHS)
ESD Static Control > Desco Industries Brand
ESD Static Control
ESD Static Control > ESD Lead Free Area Products
ESD Static Control > ESD Mat Materials
ESD Static Control > ESD Mat Materials > Worksurface Mats
Lead Free (RoHS) > ESD Static Control