Hard, rigid laminate
Designed for new or replacement ESD workbench tops
Appropriate for use in Lead-Free work areas
High pressure laminate
Resistant to hot solder and most solvents; static control properties will continue for the lifetime of the material. Exceeds NEMA standards for wear resistance.
Low Tribocharging
Meets ESD worksurface requirement of ANSI/ESD S20.20
Patented conductive layer
Superior charge dissipation and zero voltage suppression
Mat top kits
Provide instant ESD laminate surface to non-ESD tables
>10E5 and <10E10 RTG
Meets ESD worksurface requirement of EIA-625
This product has been certified to meet the RoHS requirement.
Lead-free RoHS compliant
Made in the United States of America
Estimated Shipping Weight: 5.00 Pounds
Micastat is a registered trademark of Desco Industries, Inc. and is manufactured under one or more of
the following U.S. patents: 4,455,350, 4,589,954, 4,645,717, 4,454,199
RTT: 10E6 - 10E9 Ohms per ESD S4.1
RTG: 10E6 - 10E9 Ohms per ESD S4.1
Charge Decay: <0.009 seconds per FTMS-101C, Method 4046
Voltage Suppression: 0 volts per ETS Method
Thickness: 0.038" (0.97mm)
Per ESD Hanbook TR20.20 worksurface 5.3.1.9.3 High Pressure Laminates:
These materials are rigid and are applied to a substrate, typically with adhesive systems. The majority of these materials follow the multi-layer description above. There are, however, some types that are basically homogeneous in construction.
Because the electrical properties of many high pressure laminates have some degree of humidity dependence, all high pressure laminate materials should be carefully tested for adequate performance at low humidity prior to selection and installation. Multi-layer Micastat® with conductive layer is not homogenous and is not humidity dependent.
Home
.jpg)
