For Exclusive Savings
Follow Us!


Official PayPal Seal
Secured by PayPal

  Home > ESD Static Control > Desco Industries Brand >

  Desco 09813 - Grounding Cable for ESD Mat, 15 ft w/ Resistor

Desco 09813 Anti Static Grounding Cable for ESD Mat


 
Manufacturer Price: $17.13
Price: $14.11
You Save: $3.02!

Quantity in Stock :75
Availability: Factory Stock; Usually Ships in 1 Week
Part #: DESCO-09813
Qty:

Product Description
 
Desco 09813 is an ESD Grounding Cord for an ESD anti static mat. This item offers a 15 ft cord, with a 10 mm stud and resistor.

Advanced Product Description:
A. 10mm (.395 in.) male snap to attach to mat
B. Molded in black thermoplastic elastomer
C. Wire High flex strand copper, 20 gauge, with PVC insulation, wire insulation color: black OD - .107"
D. Ring terminal, .200" ID, *(#10)
E. Extra ring terminal provided for customizing length
F. Has a one megohm resistor between the snap and wire
G. Brass crimp secures conductors and provides strain relief
H. Desco logo molded onto cap on top of shroud (10=2010)
I. Date coded to show month and year of manufacture. Arrow points to month of manufacture (12:00 = December), numerals indicate the year (10=2010)
J. 6-32 x 1/4" flat head screw and washer allow mat ground cord to be bolted to most mats by shorter or longer screw that depents on mat thickness

This item comes in a no resistor - green and wire with yellow stripe < 1.0 resistance in ohms - Desco 09814


Low profile
Reduces inadvertant snagging that may disconnect ground cord
10mm (0.395") snap stud
Easily snaps to mat 10mm socket snap, flush to mat surface
Stud has threaded hole; 6-32x1/4" flat head screw and countersunk washer are provided
Allows ground cord to be optionally bolted to mat to keep cord from disconnecting; ensures proper grounding. Available as a kit: 14234 Kit Includes one 09813 Ground Cord and one 09864 Universal Snap Kit
Ring terminal at end of ground cord
Allows easy attachment to electrical ground
Versatile
Can be used with worksurface mat or floor mat
PER ANSI/ESD S6.1
No resistor is recommened (< 1 ohm), but with resistor is acceptable (0.8 to 1.2 x 10E6 ohms)

Grounding per ESD Association
"The first step in ensuring that everything in an EPA is at the same electrical potential is to ground all conductive components of the work area (i.e., worksurfaces, people equipment, etc.) to the same electrical ground point. This point is called the common point ground and is defined by ANSI/ESD S6.1 as 'a system or method for connecting two or more grounding conductors to the same electrical potential.' ...The next step in completing the ground circuit is to connect the common ground point to the AC equipment ground an auxiliary ground, as defined in ANSI/ESD S6.1" [ESD Handbook ESD TR20.20 section 5.1.3 Basic Grounding Requirements]
"The grounding conductors (wires) from wrist straps, worksurfaces, flooring or floor mats, tools, fixtures, storage units, carts, chairs, garments, and other ESD technical elements may or may not contain added resistance. Where added resistance is not present, a direct connection point is acceptable and recommended. 
Note: Manufacturers may add resistance to the grounding conductors for purposes other than ESD (e.g. current limiting). Added resistance is acceptable for the purposes of controlling ESD provided electrostatic accumulation does not exceed specific EPA requirements. The typical added resistance in grounding conductors is 1 megohm, although other values may be specified." [Grounding ANSI/ESD S6.1-2009 section 5.3.3 ESD Technical Element Conductors]
"The resistance of the conductor from the groundable point ground of any ESD technical element (e.g. worksurface, floor, chair, wrist strap, etc.) to the common point or common connection point shall not be greater than 1 ohm. Where a resistor is used in the grounding conductor, the total resistance shall include the value of the resistor." [Grounding ANSI/ESD S6.1-2009 section 6.4.1]

All prices subject to change without notice. Prices advertised are for online orders only.
Shipping and/or international duties/taxes are separate. Stock availability can change at any time.

Be the first to write a review.



ESD Static Control > Desco Industries Brand
ESD Static Control
ESD Static Control > ESD Grounding Hardware