A. Cap -
ABS plastic, blue, with teeth to hold knitted material during bonding.
series stainless steel back plate (.016" thick). Provides 1.4 sq.
in. of skin contact surface. Manufacturing date code is stamped into stainless
steel back plate
C. 4mm snap stud
machined from 300 series stainless steel. Fits to 4mm spring loaded medical
type socket. Coil cord disengages from snap with 1-5 lbs. of
perpendicular force, fulfilling ESD-S1 paragraph 4.1.6 breakaway force
requirement. Durable, providing long life well beyond that of
sheet metal snaps.
elastic band material of light blue fiber. 1.125" (32 mm) wide and
0.10" (2.54 mm) thick, 65 strands of textured polyester,
46 strands of Lycra spandex and 14 strands of silver
plated polypropylene yarn. Made with pure silver irreversibly
bound to fibers providing both antimicrobial and anti-odor performance.
Outer surface of light blue fibers act as an insulator
conductive silver plated polypropylene (see D) represents 14.5% of the material
by weight. The 14 strands of conductive polypropylene are
uniformly knit on the inner surface of the material and are
electrically isolated from the outer surface (blue side).
item # and Made in the USA are molded into cap
G. Meets or exceeds requirements of ANSI
ESD-S20.20 and EOS/ESD-S1-1987
Fixed sized bands available in three sizes (small, medium,
Easy to use - no adjustment necessary. Three sizes provide an
excellent fit for most people
Extra wide, soft elastic band
Increased wearer comfort
Has silver impregnated polypropylene knitted on inside for
Reliably removes generated static charges
Made with pure silver irreversibly bound to fibers providing
both antimicrobial and anti-odor performance
Band locked so it will not slip
Medical grade 300 series stainless steel used for all metal
Eliminates allergic skin reactions for most people
Non-shedding, non-sloughing band material
Safe for microelectronics
One Megohm Series Resistor
To protect operator from accidental contact with equipment line
Independent review of the adequacy of the product's
Providing lot traceability to ensure quality control
Made in the United States of America
What the ESD Association says about testing wrist straps:
Per ESD Handbook TR20.20 section 22.214.171.124 Wrist Strap Checkers -
"Wrist strap checkers have historically been the primary tool for testing
the operation of the wrist strap system including, the wristband, grounding
cord, and most importantly, the electrical integrity of the contact between the
wristband and the wearer. Wrist strap checkers measure the resistance of
the entire system."
Circumference - 2.5" - 13"
Note: All bands have a 4mm snap stud. Complete wrist strap kits include
an alligator clip. Wrist strap kits include an alligator clip for
occasions when a grounded banana jack is not available. However, best
industry practice is that ESD Ground Connections should be firm fitting
connecting devices such as metallic crimps, snaps and bana plugs to be
connected to designated ground points. Use of alligator clips is not
recommended. (Ref: JEDEC Standard No. 625-A)
ANSI/ESD S20.20 Paragraph 126.96.36.199 Personnel Grounding
Requirement " ALl personnel shall be bonded or electrically connected to
ground of contrived ground when handling ESD sensitive tems. When
personnel are seated at ESD protective workstations, they shall be connected to
the common point via a wrist strap system."
Prices subject to change without notice. Stock can change at any time. Prices are for online orders only. Stock items typically ship in 24-48 hours. Special orders with the manufacturer vary and are subject to their leadtimes.