Fixed sized bands available in three sizes (small, medium, large)
Easy to use - no adjustment necessary. Three sizes provide an excellent fit for most people
Extra wide, soft elastic band
Increased wearer comfort
Has silver impregnated polypropylene knitted on inside for superior conductivity
Reliably removes generated static charges
Made with pure silver irreversibly bound to fibers providing both antimicrobial and anti-odor performance
Band locked so it will not slip
Medical grade 300 series stainless steel used for all metal parts
Eliminates allergic skin reactions for most people
Non-shedding, non-sloughing band material
Safe for microelectronics
One Megohm Series Resistor
To protect operator from accidental contact with equipment line voltage.
Independent review of the adequacy of the product's design.
Providing lot traceability to ensure quality control
Made in the United States of America
What the ESD Association says about testing wrist straps:
Per ESD Handbook TR20.20 section 184.108.40.206 Wrist Strap Checkers - "Wrist strap checkers have historically been the primary tool for testing the operation of the wrist strap system including, the wristband, grounding cord, and most importantly, the electrical integrity of the contact between the wristband and the wearer. Wrist strap checkers measure the resistance of the entire system."
Circumference - 2.5" - 13"
Note: All bands have a 4mm snap stud. Complete wrist strap kits include an alligator clip. Wrist strap kits include an alligator clip for occasions when a grounded banana jack is not available. However, best industry practice is that ESD Ground Connections should be firm fitting connecting devices such as metallic crimps, snaps and bana plugs to be connected to designated ground points. Use of alligator clips is not recommended. (Ref: JEDEC Standard No. 625-A)
ANSI/ESD S20.20 Paragraph 220.127.116.11 Personnel Grounding Requirement " ALl personnel shall be bonded or electrically connected to ground of contrived ground when handling ESD sensitive tems. When personnel are seated at ESD protective workstations, they shall be connected to the common point via a wrist strap system."