For Exclusive Savings
Follow Us!
Click for the BBB Business Review of this Soldering Equipment in Bound Brook NJ

Official PayPal Seal
Secured by PayPal

  Home > ESD Static Control > Desco Industries Brand > Foot Grounders >

  Desco 07595 ESD Toe Grounder, Foot, 2 Megohm

Desco 07595 ESD Toe Grounder for High Heel 2 megohm

Desco Industries
Authorized ESD Specialist & Distributor
MSRP: $15.55
Price: $11.64
You Save: $3.91!

Quantity available:336
Availability: Factory Stock; Usually Ships in 1 Week
Part #: DESCO-07595

Product Description
Desco 07595 is a Toe, Foot Grounder for High Heel Shoes. This anti static grounder is lined, 2 Meg 30 Inch, and has a Light Blue Tab.

The 07595 premium toe grounder provides effective ESD protection. The cup is made from a black and non-marring rubber and inner tear resistant conductive scrim. The rubber is anti-static, low tribocharging, and dissipative. It removes charges when in contact when ESD protected floors. This foot grounder meets the less than 3.5 x 10 to the 6th ohm requirement of ANSI ESD S20.20. This unit includes a two megohm molded external resistor, a conductive tab with carbon suffused fibers, and a D-ring fastening system. The product has been tested to ESD STM 97.2 - Floor Materials and Footwear Voltage Measurement in Combination with a Person. It is a suitable ESD footwear component in Flooring - Footwear System when used as the primary grounding method ( < 3.5 x 10 to the 7th ohms per ESD STM 97.1 Floor Materials and Footwear-Resistance Measurement in Combination with a Person.)

A. 0.060" thick, 1.50" wide, black conductive exterior with a non-marring interior. tear resistant nylon reinforced 4.3 oz, inner scrim layer prevents the rubber from tearing.
B. 3/8" wide, 30" long blue polyester tab contains electrically conductive carbon suffused fibers
C. 3/4" wide, blue loop material with return hook tip for quick and easy adjustment wearer's comfort
D. 3/4" wide blue elastic material stretches for comfort
E. D-ring fastening system
F. A 1/4 watt, 2 megohm black molded external resistor

Tab to cup resistance:
10 to the 6th - 10 to the 7th Ohms @ 100 volts

Toe cup
For use with high heeled shoes
Non-marring interior
Will not mar shoes
Exceptionally tear resistant dual layer rubber with inner scrim
Provides long life - saving money
D-ring fastening system
Allows for flex during walking; less particulation and sloughing
2 megohm resistor
Always complies with UL and OSHA standards
Two-ply high abrasion, wear resistant rubber
Provides rapid and complete static dissipation
8 strand nylon polyester grounding tab
Does not particulate; superior body to ground contact
RG: 1 x 10E6 < 1 x 10E8 ohms per ESD SP9.2 7 ESD TR53
Made in the United States of America

Per ESD SP9.2 Appendix B - Foot Grounder Usage Guidance "Compliance verification should be performed prior to each use (daily, shift change, etc.). The accumulation of insulative materials may increase the foot grounder system resistance. If foot grounders are worn outside the ESD protected area testing for functionality before reentry to the ESD protected area should be considered."

Per ANSI/ESD S20.20 Paragraph Personnel Grounding guidance, "ESD protective flooring, used with approved footwear, may be used as an alternative ot the wrist strap system for standing operations."

Per ESD Handbook TR 20.20 paragraph Proper Usage "ESD protective footwear is designed to reduce body charge levels by supplying a conductive path from the body to the floor material. Heel and Toe grounders should be worn on both feet to insure effective use."

Prices subject to change without notice. Stock can change at any time. Prices are for online orders only.

ESD Static Control > Desco Industries Brand > Foot Grounders
ESD Static Control > Desco Industries Brand > Foot Grounders > Toe Grounders (Adjustable)
ESD Static Control > Desco Industries Brand
ESD Static Control
ESD Static Control > ESD Footwear & Grounders