The Techspray 1573-QT is an Eco-Oven Cleaner which comes in a 1 Qt Container.
Techspray's 1573 products are used for periodic preventative maintenance to keep equipment running at top performance levels. Cleans reflow ovens, wave soldering systems, and associated heat exchanger systems by removing all types of flux residues (e.g. waterbased, RMA, noclean, leadfree). It is fast acting and more effective and safe than IPA for bakedon flux residues.
Instructions (SMT Oven Cleaning): Allow oven to cool down slightly and apply on warm surface (below 100 Degrees C). Spray and saturate the soiled area. Let soak for 5 minutes. Using a lint-free wipe (we recommend Techspray 2350-100 Wiper), wipe slightly at first to allow cleaning agent to break down residues. Continue to wipe in a circular motion until the flux residues are fully removed. Wipe completely with damp (with water) cloth to remove remaining residue. Dispose of soiled wipe as appropriate depending on the type of residues removed.
Wave Solder Finger Cleaning: Fill cleaner into finger cleaning reservoir. Keep adequate liquid level.
Chemical & Physical Properties:
Appearance: Clear, mobile liquid
Odor: Faint ethereal odor
Flash Point: none
VOC (EPA): 2.2 percent, 21.8 g/l
VOC (CARB): 2.2 percent, 21.8 g/l
Boiling Point: 212 Degrees F (100 Degrees C)
Density: 1.00 at 25 Degrees C
Chemical Composition (Chemical Name / CAS NUMBER):
Ethanol, 2-amino- / 141-43-5
Includes other hazardous components in non-reportable quantities.
Metals Compatibility (Material Name / Rating):
Brass foil / Not recommended
Copper foil / Not recommended
Nickel 200 / Excellent
Aluminum 6061 / Not recommended
Aluminum 2024 / Not recommended
Anodized aluminum / Not recommended
Stainless Steel 316 / Excellent
Stainless Steel 304 / Excellent
Mild carbon steel / Not recommended
Galvanized Steel / Not recommended
Please note the minimum order quantity for this item is 6.
For additional products/packaging please see listed items below.