For Exclusive Savings
Follow Us!
Click for the BBB Business Review of this Soldering Equipment in Bound Brook NJ

Official PayPal Seal
Secured by PayPal

  Home > Techspray Brand > Conformal Coatings >

  Techspray 2102-GHV - Fine-L-Kote SR Silicone Coating - 1 gal

Techspray 2102-GVH Fine L Kote SR Silicone Coating, 1 Gallon

MSRP: $543.74
Price: $448.82
You Save: $94.92!

Availability: Usually Ships in 7-10 business days if not a special order.
Part #: TECHSPRAY-2102-GHV

Product Description Technical Specifications
The Techspray 2102-GHV is a Fine-L Kote SR Silicone Conformal Coating.  This product is ideal for moisture and thermal vibration protection.  It is the most universal coating, offering protection for a wide range of environments.  It comes in a 1 gal can bottle.

Techspray offers a variety of coating formulas to match field and engineering requirements.  Specifications generally depend on the type of protection needed: e.g. thermal, moisture, and static resistance.  Coatings contain Opti/Scan to allow quality control inspection of coverage and evenness of the coating on a PCB.  A coated board can be passed under a standard, low-cost UV (short-wave black) light, and the coated areas glow.  The brighter the glow, the thicker the coating.

Instructions: Surface to be sprayed should be thoroughly cleaned with solvent such as Flux Remover G3 (1631).  Surface must be completely dry before application of coating.  As you spray or brush coating, allow material to flow around components.  Coating will be tack free in approximately 60 minutes; however, full cure requires 72 hours depending on humidity and thickness of application.  Coated boards can be reworked by applying soldering iron directly to coating, or complete removal can be achieved in 1 to 3 hours by using Conformal Coating Remover (2510).  Removal time depends on temperature, thickness of coating, and application.

Chemical and Physical Properties:
Appearance: Clear, colorless liquid
Odor: Aromatic odor
Flash Point: -12.2 Degrees C (10 Degrees F)
VOC (EPA): 481 g/l
Boiling Point: 79 Degrees C (134 Degrees F)

Chemical Composition (CHEMICAL NAME / CAS NUMBER):
Acetone / 67-64-1
Hexane / 110-54-3
1-(2-Methoxy-Methyl-Ethoxy)-2-Propanol Acetate / 88917-22-0
Dimethyl methylphenylmethoxy siloxane / 68952-93-2
Methylitrimethoxysilane / 1185-55-3
Benzene-methyl, (Toluene) / 108-88-3
Propane (aerosol only) / 74-98-6

For the same products in additional sizes and packaging please see products listed below

1 gal metal pail
UL recognized - file #E95150
Max operating temperature — to 392°F (200°C)
Non-ozone depleting
Dielectric strength — 1100 volts/mil
Moisture resistant
Chemically resistant
Vibration resistant — flexible
IPC-CC-830B & MIL-I-46058C qualified
UL94 V-0 rated
UV indicator for black light QC inspection

Additional Items of Interest
Techspray 2102-12S - Fine-L-Kote SR Silicone Coating - 12 oz Techspray 2102-P - Fine-L-Kote SR Silicone Coating - 1 pt Techspray 2102-5G - Fine-L-Kote SR Silicone Coating - 5 gal Techspray 2102-G - Fine-L-Kote SR Silicone Coating - 1 gal
Price: $28.42

Price: $37.26

Price: $980.90

Price: $204.07
Ground Shipping Hazmat Charge $33.00

Techspray 2102-P Fine L Kote SR Silicone Coating, 1 Pint Techspray 2102-5G Fine L Kote SR Silicone Coating, 5 Gallon Techspray 2012-G Fine L Kote SR Silicone Coating, 1 Gallon

Prices subject to change without notice. Stock can change at any time. Prices are for online orders only.

Techspray Brand > Conformal Coatings
Techspray Brand
Adhesives & Dispensers > Conformal Coatings
Adhesives & Dispensers