For Exclusive Savings
Follow Us!
Click for the BBB Business Review of this Soldering Equipment in Bound Brook NJ

Official PayPal Seal
Secured by PayPal

  Home > Techspray Brand > Conformal Coatings >

  Techspray 2108-12S - Turbo-Coat Acrylic Conformal Coating - 12 oz

Techspray 210-12S Turbo Coat Acrylic Conformal Coating, 12 oz

MSRP: $24.98
Price: $22.01
You Save: $2.97!
Minimum order must be purchased in multiples:   12

Availability: Usually Ships in 7-10 business days if not a special order.
Part #: TECHSPRAY-2108-12S

Product Description Technical Specifications
The Techspray 2108-12S is a Turbo-Coat Acrylic Conformal Coating. It is designed to speed up board production throughput without additional investment on expensive UV systems or other capital equipment. It comes in a 12 oz aerosol pray can.
Conformal coating cure time is often considered a production bottleneck for PCB assembly operations.  TurboCoat dries tack-free in 3 minutes, allowing manufactures to handle boards in 1/3 the time of the leading acrylic coating.  Full cure can be achieved as quickly as 10 minutes with elevated temperatures.
Technology offers a variety of coating formulas to match field and engineering requirements.  Specifications generally depent on the type of protection needed: e.g. thermal, moisture, and static resistance.  Coatings contain Opti/Scan to allow quality control inspection of coverage and evenness of the coating on a PCB.  A coated board can be passed under a standard, low-cost UV (short-wave black) light, and the coated areas glow.  The brighter the glow, the thicker the coating.
Instructions: Surface to be sprayed should be thoroughly cleaned with solvent such as Flux Remover G3 (1631).  Surface must be completely dry before application of coating.  As you spray or brush coating, allow material to flow around components.  Coating will be tack free in approximately 5 minutes;  however, full cure requires 24 hours depending on humidity and thickness of application.  Coated boards can be reworked by applying soldering iron directly to coating, or complete removal can be achieved 1 to 3 hours by using Conformal Coating Remover (2510).  Removal time depends on temperature, thickness of coating, and application.
Chemical and Physical Properties:
Appearance: Clear, colorless liquid
Odor: Aromatic odor
Flash Point: 1.4 Degrees C (35 Degrees F)
VOC (EPA): 33 Percent (aerosol), 64 Percent (bulk)
VOC (CARB): 33 Percent (aerosol), 64 Percent (bulk)
Boiling Point: 38.4 Degrees C (103 Degrees F)
Density: 0.834 at 25 Degrees C (77 Degrees F)
Chemical Composition (CHEMICAL NAME / CAS NUMBER):
Acrylic Polymer (non-hazardous) / 109-60-4
n-Propyl acetate / 142-82-5
n-Heptane / 67-64-1
Acetone / 88917-22-0
1-(2-Methoxy-Methyl-Ethoxy)-2-Propanol Acetate / 811-97-2
1,1,1,2-Tetrafluoroethane (aerosol only)

Please note the minimum purchase quantity for this item is 6 cans (they come in 1 unit)
For the same item in different packaging and sizes please see additional items below

12 oz aerosol
Fastest cure – dry to touch in 3 minutes!
Max operating temperature - to 257°F (125°C)
Non-ozone depleting
Dielectric strength - 1000 volts/mil
Fast & easy rework & repair
IPC-CC-830B & MIL-I-46058C qualified
UL94 V-0 rated
UV indicator for black light QC inspection
Toluene & Xylene free -- no HAPs (hazardous air pollutants)

Additional Items of Interest
Techspray 2108-G Turbo Coat Acrylic Coating 1 Gal Techspray 2108-5G Turbo Coat Acrylic Coating 5 Gal Techspray 2108-P Turbo Coat Acrylic Coating 1 pt Techspray 2108-N Turbo Coat Acrylic Coating Pen
Price: $116.96
Hazmat Ground UPS/FexEx Fee: $33.00

Price: $462.99

Price: $22.80

Price: $12.20

Techspray 2108-G Turbo Coat Acrylic Conformal Coating, 1 Gallon Techspray 2108-5G Turbo Coat Acrylic Coating, 5 Gal Techspray 2108-P Turbo Coat Acrylic Coating, 1 Pint Techspray 2108-N Turbo Coat Acrylic Coating Pen, 10 ml

Prices subject to change without notice. Stock can change at any time. Prices are for online orders only.

Techspray Brand > Conformal Coatings
Techspray Brand
Aerosols & Cleaners > Aerosols
Adhesives & Dispensers > Conformal Coatings
Aerosols & Cleaners
Adhesives & Dispensers