For Exclusive Savings
Follow Us!
Click for the BBB Business Review of this Soldering Equipment in Bound Brook NJ

Official PayPal Seal
Secured by PayPal

  Home > Techspray Brand > ESD Products >

  Techspray 1720-5G - Zero Charge Floor Coating - 5 gal Pail

Techspray 1720-5G Zero Charge Floor Coating 5 Gallons


 
Manufacturer Price: $288.60
Price: $238.24
You Save: $50.36!

Availability: Usually Ships in 7-10 business days if not a special order.
Part #: TECHSPRAY-1720-5G
Quantity:

Product Description
 
The Techspray 1720-5G is a Zero Charge, ESD Safe Floor Coating.  This coating is fast drying and antistatic that eliminates static charge and reduces triboelectric generation from flexible surfaces.  It is ideal for plastics, fabrics, and carpet.  This item comes in a 5 gal pail container.
 
Techspray's ESD-safe products can help maintain work areas within the ANSI/ESDS20.20 standards set by the ESD Association (www.esda.com).  In a static-free environment, the work area, tools and personnel form a circuit.  Electrostatic Discharge (ESD) occurs when the charges of two surfaces with a large electronic potential (difference) equalize instantaneously.  The resulting discharge or spark can cause catastrophic or latent damage to electronic components.  ESD programs maintan an equal potential by maintaining continuous contact with ground, avoiding ESD damage.  Cleaners, lotions, and coatins are an integral part of an ESD control program.
 
Instructions: With a new mop and clean pails, apply coating as follows: 1. Apply thin coat to floor, i.e 3/4 way down on the ringer.  Let dry to touch, approximately 45-60 minutes.  2. Apply a second coat, approximately 1/2 way down on the ringer.  Note: Two coats only are recommended for conductive tile.  3. If a third coat is applied, wait 24-hour waiting period/dry time after previous coat.  If a third coat is applied, the floor space may be occupied once it is dry.  After that a 6-hour wait, buff the floor with a coating yield of 1,200 ft2 for each gallon of coating per coat.
 
Chemical & Physical Properties:
Appearance: Opaque white
Odor: Aromatic odor
Flash Point: none
VOC (EPA) 5.15 percent wt, 53.73 g/l
Boiling Point: 100 Degrees C (212  Degrees F)
Density: 1.04 at 25 Degrees C
 
Chemical Composition (Chemical Name / CAS #):
Water / 7732-18-5
Acrylate Copolymer
Ethanol,2-butoxy-,phosphate / 78-51-3
1,2-Propanediol / 57-55-6
Potassium Chloride / 7447-40-7
Alcohols, C12-C13, ethoxylated / 66455-14-9
Ethoxylated secondary alcohol / 84133-50-6
Sodium lauryl sulfate / 68585-47-7
Sodium laurel ether sulfate / 68891-38-3
Tall oil fatty acid potassium salt / 61790-44-1
5-Chloro-2-methyl-3(2H)-isothiaxolone,mixt. with 2-methyl-3(2H)- / 55965-84-9

 
For additional sizes please see products listed below

5 gal pail
Resistivity between 10^6 To 10^10
High gloss polymer
Non-ozone depleting
Slip resistant
Effective in low humidity
Zinc free

Additional Items of Interest
Techspray 1720-G Zero Charge Floor Coating 1 Gal Techspray 1720-54G Zero Charge ESD Floor Coating
Price: $58.79

Add
Price: $2,218.14

Add
Techspray 1720-G Zero Charge Floor Coating 1 Gal Techspray 1720-54G Zero Charge ESD Floor Coating 54 Gals

All prices subject to change without notice. Prices advertised are for online orders only.
Shipping and/or international duties/taxes are separate. Stock availability can change at any time.

Be the first to write a review.



Techspray Brand > ESD Products
ESD Static Control > ESD Coatings
Chemicals
ESD Static Control
Techspray Brand