For Exclusive Savings
Follow Us!
Click for the BBB Business Review of this Soldering Equipment in Bound Brook NJ

Official PayPal Seal
Secured by PayPal

  Home > Techspray Brand > Universal Solvent Cleaners >

  Techspray 1669-5G - Asahiklin AK225 Flux Remover - 44 lb Pail

Techspray 1669-5G Asahiklin AK225 Flux Remover


 
Price: $1,294.08

Availability: Usually Ships in 7-10 business days if not a special order.
Part #: TECHSPRAY-1669-5G
Quantity:

Product Description Technical Specifications
 

The Techspray 1669-5G is a Asahiklin AK-225 T Flux Remover is designed to prevent white residue and removes fluxes prone to white residue.  It comes in a 44 lb Pail.  This product is configured for vapor degreasing and coldbatch cleaning.

Note: AK225 T is not an azeotrope, so density should be monitored and AES (1666) added to maintain consistant operating parameters.
 
Instructions: AK225 T is not an azeotrope, so density should be monitored and AES (1666) added to maintain consistent operating parameters. Reclamation Process: The reclamation (i.e.. boil down) process utilizes the vapor-degreaser as a still to distill solvent from the dirty boil sump and allows you to reclaim and reuse this solvent. When it is determined that the Boil Sump needs to be cleaned out, you should do the following things to boil down the solvent: 1. If you have a 2 sump vapor-degreaser, drain the rinse sump into a clean container for reuse. If you have a one-sump vapor-degreaser, drain the spray reservoir using the spray wand. This material should be collected in a clean container, so it can be reused. 2. Allow the solvent to continue to boil, and the vapors to condense, until such time as one of two things happens: a. the High Temperature Control (HTC) trips and turns off the heat to the heating elements or b. the Liquid Level Control trips because the level in the Boil Sump is too low. 3. Drain the remaining solvent/soil mixture into a container that is labeled as Hazardous Waste. This material can be used in future “boil downs” to reclaim more of the solvent in the mixture. 4. Use the retained solvent (from step 1) to refill the vapor-degreaser and add whatever volume of solvent is necessary to completely fill the machine. This process can be repeated as often as necessary, depending on the amount of usage of the vapor-degreaser and the amount of soil that is introduced into the vapor-degreaser. When you “boil down”, always put the solvent/soil mixture into the vapor-degreaser to reclaim additional amount of the solvent from this mixture.
 
Chemical & Physical Properties:
Appearance: Clear, colorless liquid
Odor: Faint ethereal odor
Flash Point: none
VOC (EPA): none
VOC (CARB): 200 g/l
Boiling Point: 54 Degrees C
 
Chemical Composition (Chemical Name / CAS #):
3,3-Dichloro-1,1,1,2,2-pentafluoropropane / 422-56-0
1,3-Dichloro-1,1,2,2,3-pentafluoropropane / 507-55-1
Ethanol / 64-17-5
Cyclohexane / 110-82-7
Nitromethane / 75-52-5

 
For a different quantity of this item please see item listed below

44 lb pail
Ideal for no-clean fluxes
Non-flammable
Safe on electronics
Rapid evaporation
Zero residue
Safe on most plastics
EPA SNAP approved
Vapor-degreaser formula

All prices subject to change without notice. Prices advertised are for online orders only.
Shipping and/or international duties/taxes are separate. Stock availability can change at any time.

Be the first to write a review.



Techspray Brand > Universal Solvent Cleaners
Chemicals
Aerosols & Cleaners > Solvents
Aerosols & Cleaners
Techspray Brand