For Exclusive Savings
Follow Us!
Click for the BBB Business Review of this Soldering Equipment in Bound Brook NJ

Official PayPal Seal
Secured by PayPal

  Home > Techspray Brand > Flux Removers >

  Techspray 1665-8S - Flux Remover AMS for Plastics - 8 oz Aerosol

Techspray 1665-8S Flux Remover AMS Defluxer


 
Manufacturer Price: $28.51
Price: $22.06
You Save: $6.45!
Minimum order must be purchased in multiples:   6

Availability: Usually Ships in 7-10 business days if not a special order.
Part #: TECHSPRAY-1665-8S
Quantity:

Product Description Technical Specifications
 

The Techspray 1665-8S is is a Flux Remover AMS for Plastics.  This nonflammable, high precision flux remover comes in an 8 oz aerosol spray can. It is ideally suited for sensitive plastics often used in packaging.

Flux removers (defluxers) remove flux residues and other contaminants left by manufacture, rework, or repair of printed circuit boards.  Residues from higher, leadfree temperatures are more baked on and harder to clean.  G3, Ecoline and PrevisionV flux removers have been proven very effective at removing fluxes baked on at leadfree temperatures.  Microcomponents and fine pitch leads are delicate and easily damaged, so brushing and scrubbing should be avoided if possible.  Both G3, Ecoline and PrevisionV have a powerful spray and strong solvent that blasts off residues and cleans areas under components that a brush cannot touch.
 
Applications: Cold/Bucket Cleaning, Electronic Production/Rework, Electronic Repair/Maintenance, Soldering/Desoldering, Ultra-Sonic Cleaning, Vapor-Degreasing
 
Instructions:
Maintenance cleaning: Disconnect equipment from power source.  Make sure opening of sprayhead is pointing toward surface to be cleaned.  Hold can 6-8 inches away.  Direct spray to saturate soiled surface.  A TechBrush (2000 Series) may be utilized to help in the removal of heavy soils.  When used as a general cleaner, start at top of area to be cleaned using a sweeping motion and spray the area, slowly working toward the bottom.  To clean in hard to reach areas, insert extension tube in sprayhead to direct spray.  Allow components to dry completely before applying current.
Defluxing: Make sure opening of sprayhead is pointing toward surface to be cleaned.  Hold can 15-20 cm away.  Direct spray to saturate soiled surface.  A TechBrush (2000 Series) may be utilized to help in the removal of heavy soils.  When used as a general cleaner, start at top of area to be cleaned using a sweeping motion, and spray the area slowly, working towards the bottom.  To clean in hard to reach areas, insert extension tube in sprayhead to direct spray.  Allow components to dry completely before applying current.  For flat surface cleaning, saturate a lint-free TechClean Twillwipe (2357) or Purwipe (2355) and wipe surface with cloth.  Rotate the cleaning side of the wipe periodically and re-saturate.
 
Chemical & Physical Properties:
Appearance: Clear, colorless liquid
Odor: Faint ethereal odor
Flash Point: none
VOC (EPA): 5 percent (aerosol)
VOC (CARB): 75 percent (aerosol), 100 percent (bulk)
Boiling Point: 54 Degrees C (129 Degrees F)
 
Chemical Composition (Chemical Name / CAS #):
3,3-Dichloro-1,1,1,2,2-pentafluoropropane / 422-56-0
1,3-Dichloro-1,1,2,2,3-pentafluoropropane / 507-55-1
1,2-transdichloroethylene / 156-60-5
Methanol / 67-56-1
Nitromethane / 75-52-5
1,1,1,2-Tetrafluoroethane (aerosol) / 811-97-2
Carbon dioxide (aerosol) / 124-38-9

 
For the same item in additional sizes and packaging please see items below

8 oz aerosol
Ideal for sensitive plastics
Non-flammable
High Precision - Residue Free
Safe on electronics
Rapid evaporation
Zero residue
Safe on most plastics
EPA SNAP approved
Vapor-degreaser formula

Additional Items of Interest
Techspray 1665-54G Flux Remover AMS for Plastics Techspray 1665-5G Flux Remover AMS Defluxer Techspray 1665-18S Flux Remover AMS Defluxer 18 oz
Price: $14,411.48

Add
Price: $1,281.63

Add
Price: $50.89

Add
Techspray 1665-54G Flux Remover AMS for Plastics Techspray 1665-5G Flux Remover AMS Defluxer Techspray 1665-18S Flux Remover AMS General Duty Defluxer, 18 oz

All prices subject to change without notice. Prices advertised are for online orders only.
Shipping and/or international duties/taxes are separate. Stock availability can change at any time.

Be the first to write a review.



Techspray Brand > Flux Removers
Aerosols & Cleaners > Aerosols
Aerosols & Cleaners > Flux Removers
Chemicals
Aerosols & Cleaners
Techspray Brand