For Exclusive Savings
Follow Us!
Click for the BBB Business Review of this Soldering Equipment in Bound Brook NJ

Official PayPal Seal
Secured by PayPal

  Home > Techspray Brand > Flux Removers >

  Techspray 1660-6S - No Clean Flux Remover - 6 oz Aerosol

Techspray 1660-6S No-lean Flux Remover 6 oz

MSRP: $27.00
Price: $23.76
You Save: $3.24!
Minimum order must be purchased in multiples:   12

Availability: Usually Ships in 7-10 business days if not a special order.
Part #: TECHSPRAY-1660-6S

Product Description Technical Specifications
The Techspray 1660-6S is a No-Clean Flux Remover.  This item is nonflammable, high precision, and specifically formulated to avoid and clean white residues caused by noclean fluxes.  This item comes in a 6 oz aerosol container.
Flux removers (defluxers) remove flux residues and other contaminants left by manufacture, rework, or repair of printed circuit boards.  Residues from higher, leadfree temperatures are more baked on and harder to clean.  G3, Ecoline, and PrevisionV flux removers have been proven very effective at removing fluxes baked on at leadfree temperatures.  Microcomponents and fine pitch leads are delicate and easily damaged, so brushing and scrubbing should be avoided if possible.  Both G3, Ecoline, and PrecisionV have a powerful spray and strong solvent that blasts off residues and cleans areas under components that a brush cannot touch.
Make sure opening of sprayhead is pointing toward surface to be cleaned.  Hold can 15-20 cm away.  Direct spray to saturate soiled surface.  A TechBrush (2000 Series) may be utilized to help in the removal of heavy soils.  When used as a general cleaner, start at top of area to be cleaned using a sweeping motion, and spray the area slowly, working towards the bottom.  To clean in hard to reach areas, insert extension tube in sprayhead to direct spray.  Allow components to dry completely before applying current.  For flat surface cleaning, saturate a lint-free TechClean Twillwipe (2357) or Purwipe (2355) and wipe surface with cloth.  Rotate the cleaning side of the wipe periodically and re-saturate.
Chemical & Physical Properties:
Appearance: Clear, colorless liquid
Odor: Faint ethereal odor
Flash point: none
VOC (EPA): 35 Percent
VOC (CARB): 75 Percent
Boiling Point: 44.6 Degrees C (114 Degrees F)
Chemical Composition (Chemical Name / CAS NUMBER):
3,3-Dichloro-1,1,1,2,2-pentafluoropropane / 422-56-0
1,3-Dichloro-1,1,2,2,3-pentafluoropropane / 507-55-1
1,2-transdichloroethylene / 156-60-5
methanol / 67-56-1
Nitromethane / 75-52-5
1,1,1,2-Tetrafluoroethane (aerosol) / 811-97-2
Carbon dioxide (aerosol) / 124-38-9


6 oz aerosol
Safe on electronics
Rapid evaporation
Zero residue
Safe on most plastics
EPA SNAP approved
Ideal for no-clean fluxes

Prices subject to change without notice. Stock can change at any time. Prices are for online orders only.

Techspray Brand > Flux Removers
Aerosols & Cleaners > Aerosols
Aerosols & Cleaners > Flux Removers
Aerosols & Cleaners
Techspray Brand