For Exclusive Savings
Follow Us!


Official PayPal Seal
Secured by PayPal

  Home > Techspray Brand > SMT Cleaners >

  Techspray 1572-G - Eco-Stencil AQ Concentrate - 1 Gal

Techspray 1572-G Eco-Stencil AQ Concentrate


 
Manufacturer Price: $84.00
Price: $79.49
You Save: $4.51!

Availability: Usually Ships in 7-10 business days if not a special order.
Part #: TECHSPRAY-1572-G
Qty:

Product Description
 
The Techspray 1572-G is is an Eco-Stencil AQ Concentrate 1 Gallon Container.
  • The 1572 Stencil Cleaner is designed for ultrasonic and spray-in air systems, Eco-Stencil AQ batch stencil cleaner offers great clening performance with much lower environmental impact.  Effectively removes all types of solder paste (e.g. water-based, RMA, no-clean, lead-free) and uncured adhesives from stencils and misprinted boards.
  • When a water rinse is a part of the cleaning process, Eco-Stencil AQ provides an economical, yet powerful cleaning solution.  This water-based cleaner uses the latest in environmentally friendly surfactants to break down pastes and adhesives.  Concentrated formula saves storage cost.
  • Drop-in replacement for semi-aqueous and aqueous cleaners.  Eco-Stencil AQ can be used in all the most popular cleaning environment.  Aqueous Technologies, Austin America Technologies, SmartSonic, EMC Global, and more.  Eco-Stencil AQ works with current filtration methods, providing a long bath life and minimized disposal cost. 
  • Eco-Stencil AQ batch stencil cleaner has been tested and proven compatible with every part of your stencil - from the frame, screen and stencil to the adhesives binding it together.
  • Eco-Stencil Cleaner is fully compliant with CARB (California Air Resource Board) requirements.  Also compliant with European REACH (Registration, Evaluation, Authorization & Restriction of Chemicals) and WEEE (Waste Electrical and Electronic Equipment Directive) initiatives.  It does not contain RoHS (Restriction of Hazardous Substances) restricted substances, SVHC (Substances of Very High Concern) list substances, or halides.
Instructions: Dilution 1 Part Eco-Stencil AQ : 9 Parts DI Water - Used as directed in your batch stencil cleaner equipment instructions.  Add 9 parts deionized (DI) water to every 1 part Eco-Stencil AQ.  Mix thoroughly.  Higher concentration can be used to clean more difficult soils or the increase cleaning speed.  A common method of checking concentration is by BRIX refractive index.  For refernce, the following concentrations and readings are provided.
 
Stencil Cleaner AQ - Refractive Index (Dilution / ND / BRIX):
5  percent Dilution / 1.337 ND / 2.7 BRIX
8 percent Dilution / 1.340 ND / 4.6 BRIX
10 percent Dilution (recommended) / 1.342 ND / 6.1 BRIX
12 percent Dilution / 1.343 ND / 7.1 BRIX
14 percent Dilution / 1.345 ND / 8.2 BRIX
16 percent Dilution / 1.347 ND / 8.2 BRIX
18 percent Dilution / 1.349 ND / 9.5 BRIX
20 percent Dilution / 1.350 ND / 11.3 BRIX
22 percent Dilution / 1.353 ND / 13.1 BRIX
24 percent Dilution / 1.354 ND / 14.1 BRIX
100 percent (concentrate) / 1.419 ND / 49.3 BRIX
 
Chemical Components (Component / CAS NUMBER):
3-methyl-3-methoxy-1-butanol / 56539-66-3
Aliphatic Ethoxylated Alcohols / 78330-20-8
Dimethyl-2-methyl glutarate / 14035-94-0
Ethoxyl-Propoxyl Terpene / 174955-61-4
Poly(oxy-1,2-ethanediyl), a-hydro-w-hydroxy / 25322-68-3
 
Chemical Properties (MSDS available upon request):
Properties based on diluted materials, as recommended for use in batch system.
Exposure Limit: Limids on components not established.  Manufacturer's recommendation 1000 ppm.
Physical State: Liquid
Odor: Clean ethereal odor
Appearance: Clear, mobile liquid
pH: 7-8
Boiling Point: 97 Degrees C (207 Degrees f)
Flashpoint and Method (TAG Closed Cup): None to boiling point
Solubility in Water: Fully miscible
Density: 1 at 25 Degrees C
VOC (by wt): 5 percent  by weight (EPA)
 
Performance (Ultrasonic Test Method):
Stainless steel stencil coated with 5 different pastes (Kester EM907 no-clean lead-free, no-clean lead-free, H531 OA lead, FL250D no-clean lead, and Alpha Metals RMA lead RMA390) and allowed to fully dry over at least 8 hours.  Branson 5200 ultrasonic used to simulate sonics used in batch stencil cleaners.  After allotted time, samples rinsed under DI water.  if no visible flux residues or solder spheres present, the stencil is considered clean and the time logged.  Cleanliness judged with 10X visual inspection per IPC-7526 Stencil and Misprinted Board Cleaning Handbook.

Spray-in-Air:
Test method: Eco-Stencil AQ tested on a stainless steel stencil in Austin American Technologies X30A Stencil Cleaner using 4 different pastes (Kester EM907 no-clean lead-free, NXG1 no-clean lead-free, H531 OA lead, and FL250 no-clean lead).  Cleanliness
judged with 10X visual inspection per IPC-7526 Stencil and Misprinted Board Cleaning Handbook.
The following were the results:
1. Paste was removed from stencil in less than 1 minute into the cleaning cycle.
2. Foaming was minimal even after a 20 minute cycle.
 
Compatibility:
The goal of compatibility testing is to test until the point of failure.  Test parameters are generally extreme and accelerated, so go beyond the real world environment.  Techspray considers Eco-Stencil AW compatible within normal operating conditions of batch stencil cleaning and with exposed materials normally found in the equipment and stencils.



For additional products please see products list below.

Non-Flammable
Quickly Clean Paste of Uncured Adhesive
Effective on all solder pastes: Lead, Lead-Free, Aqueous, RMA & No- Clean
Safe for Stencils, Misprinted Boards & Cleaning Equipment
Biodegradable
Low VOC, zero GWP
Non-Ozone Depleting
Halide-Free - Prevents Ionic Contamination •pH in neutral range (6-9 pH) - Avoid Corrosion

Additional Items of Interest
Techspray 1572-5G Eco-Stencil AQ Concentrate
Price: $367.50

Add
Techspray 1572-5G Eco-Stencil

All prices subject to change without notice. Prices advertised are for online orders only.
Shipping and/or international duties/taxes are separate. Stock availability can change at any time.

Be the first to write a review.



Techspray Brand > SMT Cleaners
Aerosols & Cleaners > Stencil Cleaners
Chemicals
Aerosols & Cleaners
Techspray Brand